List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Digital Intelligence Situation Mapboard for Enhanced Situation Awareness

    SBC: Trident Systems Incorporated            Topic: N/A

    Current battlefield situation displays either lack resolution ir restrict the user's perception to a small segment of the battlefield. Additionally, the plotting of data on these displays is extremely manpower-intensive, consuming valuable personnel resources that could be applied to situation analysis and other important tasks. Trident proposes to design and produce an innovative situation awar ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  2. SMART SENSORS USING OPTICAL FIBER INTERCONNECTS AND DISTRIBUTED MEMS

    SBC: Luna Innovations Incorporated            Topic: N/A

    This SBIR program would develop practical methods for the interconnection, addressing and control of large numbers of distributed MEMS-based sensing and actuation elements using optical fiber multiplexing techniques. Such interconnected sensor/actuator arrays have immediate and long-term applications in the instrumentation and control of adaptive aircraft, spacecraft and hydrocraft structures, fl ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  3. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    The trend toward replacement of highly toxic chemicals with less hazardous alternatives has created the demand for replacement of chromate conversion coatings for corrosion protection of aluminum alloys. Aluminum alloys are the predominate structural material used in aircraft because of their high strength-to-weight ratios, affordability and processability. Aluminum is subject to catastrophic fail ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  4. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  5. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  6. Hydrogen Supply System for Small Proton Exchange Membrane (PEM) Fuel Cell Stacks

    SBC: Royal Systems/ Associated            Topic: N/A

    1. A conceptual baseline design of a hydrogen supply system with a on/off capability will be prepared for delivering hydrogen in increments of up to 10g/hour with a total capacity of 120g hydrogen. This baseline design will be based upon a solid state hydrogen reactant mixture with a yield of 8% by reactant weight which has been previously qualified for military use. ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  7. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC.            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. HLA Federation Implementation Tools

    SBC: SYNETICS, INC.            Topic: N/A

    Developing a set of tools that is automated, integrated, and compliant with the deired goals of this SBIR is not a simple task. If a coordinated approach is not taken from the start, then a hodgepodge of tools and capabilities for a hodgepodge of environments wil be developed with unwanted outcome of falling short of the desired goals. Therefore, SYNETICS proposes to establish a CASE-like enviro ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Development of a Commercial Multiple Degree of Freedom Measurement System

    SBC: American Research Corporation of Virginia            Topic: N/A

    The Multiple Degree of Freedom Measurement (MDFM) System, developed under Wright Laboratory, has been identified as having strong commercial potential as a significant enhancement to existing products in the machine tool industry for machine tool calibration or coordinate measuring machine enhancement. The MDFM is in need of revision to incorporate state-of-the-art technology, to prepare the devi ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  10. SMART SENSORS USING OPTICAL FIBER INTERCONNECTS AND DISTRIBUTED MEMS

    SBC: Luna Innovations Incorporated            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government