You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Advanced, Man-Portable Locator of Magnetic Targets

    SBC: Quantum Magnetics, Inc.            Topic: N/A

    This SBIR proposal addresses a high priority DoD need for an improved man-portable magnetic sensor to detect and localize mines and UneXploded Ordnance (UXO). UXO field testing has clearly shown the superiority of magnetic-based technology over other technologies such as ground penetrating radar and infrared sensors. Total field magnetometers and gradiometers, although relatively unaffected b ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. Advanced Tooling Manufacturing for Composite Structures (ATMCS)

    SBC: Fem Engineering            Topic: N/A

    Sheet metal products have made an indispensable place for themselves in our day to day lives. Light weight, good surface finish, low finished product cost, and relatively good formability are just few of the many features that make the sheet metal products so attractive. This includes all the product lines such as automotive, aerospace, appliance, construction, instruments, heating and ventilati ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  3. Advanced Tooling Manufacturing for Composite Structures (ATMCS)

    SBC: Fem Engineering            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    The trend toward replacement of highly toxic chemicals with less hazardous alternatives has created the demand for replacement of chromate conversion coatings for corrosion protection of aluminum alloys. Aluminum alloys are the predominate structural material used in aircraft because of their high strength-to-weight ratios, affordability and processability. Aluminum is subject to catastrophic fail ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  5. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  6. An Angular Multiplexed Holographic Memory System Based on a Compact High-Speed Electro-Optic Beam Deflector

    SBC: RADIANT RESEARCH, INC.            Topic: N/A

    Current angular multiplexed holographic memory systems are facing obstacles in the area of dynamic control of two dimensional page oriented data. In order to massively store high density two-dimensional images and access all these stored images in a very short time without any moving parts, an innovative page-addressing delfector is required. Existing page-addressing deflectors requires a moving ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Commercialization of C4I Simulation Components for Disaster Planning and Recovery Using HLA

    SBC: Mystech Assoc., Inc.            Topic: N/A

    Federal, state, local, and military missions for Disaster Relief, Emergency Action, and Humanitarian Assistance (DREAHA) require all of the traditional command, control, communications, computer and intelligence (C4I) functions used by military units for traditional warfare. New civilian systems that leverage and reuse military C4I systems to plan, prepare, identify, vector, monitor, and recover ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. Compact, High Capacity Parallel Optical Memories

    SBC: Accuwave Corp.            Topic: N/A

    In this proposed SBIR program, Accuwave will investigate and demonstrate architectures for compact hologrpahic storage using materials and system innovations to reduce complexity and improve performance. Crosstalk, data formatting, input/output interfaces, and other relevant parameters will be characterized. Both wavelength and angle multiplexing, as well as its combination, will be used to prov ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Composite Preburner & Turbopump Housing Materials and Process

    SBC: WILSON COMPOSITE TECHNOLOGIES            Topic: N/A

    Composite technology exists for application to cryogenic fluid storage without an interface liner. This technology is being applied to an LH2 storage pressure vessel under Air Force Contract F29601-C-0217. This proposal outlines a program to transfer the LH2 composite technology to liquid rocket engine components. This proposal will address requirements for feed system assemblies, such as prebu ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government