List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. ACTIVE NOISE CONTROL

    SBC: SVS R&D SYSTEMS, INC.            Topic: N/A

    THE PROBLEMS OF ATTENUATING DUCTED NOISE AND DISTRIBUTED NOISE ARE ADDRESSED USING ACTIVE NOISE CANCELLATION TECHNIQUES. FOR DUCTED NOISE, A COMBINATION OF COMMERCIAL ANC EQUIPMENT WITH LOW PRESSURE DROP MUFFLERS IN AN SVS PROPRIETARY CONFIGURATION WILL BE EXAMINED. COST AND PERFORMANCE TRADES BETWEEN THE ACTIVE CONFIGURATION AND PASSIVE MUFFLERS WILL BE MADE AND AN EXPERIMENT WILL BE DESIGNED FOR ...

    SBIR Phase I 1994 Department of DefenseNavy
  2. AEW CMD Surveillance Modeling/Simulation

    SBC: Technology Service Corporation            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseNavy
  3. Agile Manufacturing-Simulation and Integration Tools

    SBC: TECHNICAL SOLUTIONS, INC.            Topic: N/A

    The objective of agile manufacturing is to increase competitiveness of the US manufacturing base, while addressing DoD priorities, with a combined goal of improving US global competitiveness and national security. To achieve this objective, significant changes in technology and infrastructure must occur. This proposal addresses a significant component of these required changes, a Next Generation C ...

    SBIR Phase II 1998 Department of DefenseNavy
  4. Aircraft & Cruise Missile Mission and Route Planning Using Real-Time Pattern Matching Techniques

    SBC: Intelligent Reasoning Systems (IRS)            Topic: N/A

    In this proposal we present a novel approach to aircraft and missile mission and route planning using neural networks. The approach is unique in four aspects: l) it is a proactive planner that looks at the global topographic characteristics of the battlefield environment when generating plans; 2) it uses a cost surface to determine the advantages or disadvantages of moving through an area by integ ...

    SBIR Phase II 1994 Department of DefenseNavy
  5. Automated Ship Active Sonar Mutual Interference Planning

    SBC: SONALYSTS, INC.            Topic: N/A

    Phase I of this project will provide an automated active sonar mutual interference (MI) planning module design and proof-of-concept demonstration with the following innovative elements: Methodology for predicting MI levels, characteristics, and timing from a transmitting sonar to a receiving sonar based on the sonar type and setups of each ship, range and relative aspect angle, and propagation fac ...

    SBIR Phase I 1994 Department of DefenseNavy
  6. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase II 1998 Department of DefenseNavy
  7. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  8. Collaborative Systems Engineering Workbench and Network

    SBC: MANAGEMENT SCIENCES INC            Topic: N/A

    The Virtual Engineering firm is a reality, with a team of scientists and engineers scattered at home sites working together to solve tough engineering problems. This SBIR will perform research and development to provide collaborative system engineering tools for network engineering projects. We will explore new directions for collaborative systems engineering (SE) that enable distributed req ...

    SBIR Phase II 1998 Department of DefenseNavy
  9. Compact System for Safe Removal of Conformal Coatings from Electronic Printed Circuit Boards

    SBC: Tetra Corporation            Topic: N/A

    An important need for the US Navy and other military services is the effective field repair of electronic printed circuit boards which have been sealed with conformal coatings. Repair of the ekK*Wk circuit boards by replacing components first requires removal of the conformal coating without damaging the other components on the board. Tetra Corporation proposes to adapt our proven coatings re ...

    SBIR Phase I 1996 Department of DefenseNavy
  10. Compact Tunable Infrared Grating Laser

    SBC: Omega-P, Inc.            Topic: N/A

    A Phase I SBIR study is proposed of a novel infrared laser configuration employing a coaxial resonant structure and a gyrating electron beam. The center conductor of the structure contains axial ridges that support diffraction radiation induced by the axis-encircling gyrating beam, while the outer conductor of the structure supports radial standing waves that provide feedback to sustain oscillatio ...

    SBIR Phase I 1994 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government