List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Title missing

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of DefenseAir Force
  2. Ultra-high Dielectric Constant Dielectric Materials

    SBC: TPL, INC.            Topic: N/A

    NON-NUCLEAR APPROACHES ARE SOUGHT FOR HIGH ENERGY DENSITIES FOR SPACE POWER SYSTEMS. ONE CRITICAL COMPONENT TO ACHIEVE IMPROVED PERFORMANCE IS CAPACITOR STORES. THESE ARE DEPENDENT UPON ADVANCES IN LOW LOSS, HIGH ENERGY/HIGH POWER DENSITY STORAGE MATERIALS. A UNIQUE INORGANIC COMPOSITE IS PROPOSED FOR INVESTIGATION AS A HIGH ENERGY DENSITY STORAGE MATERIAL. AN APPROACH IS FORMULATED BASED ON SOL-G ...

    SBIR Phase II 1996 Department of DefenseMissile Defense Agency
  3. Titel missing

    SBC: SVS, INC.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of DefenseAir Force
  4. UltraLite Optical Control System (ULOCS)

    SBC: SVS, INC.            Topic: N/A

    The problem of suppressing acoustically induced vibration in precision equipment is addressed. The study specifically addresses acoustically induced vibration in an airborne optical train. Two approaches will be studied. (1) The first approach is to inertially instrument each optical element, sensing the motion causing optical jitter. The array of vibration measurements are used with a robust ...

    SBIR Phase II 1998 Department of DefenseAir Force
  5. Semiautomatic, Quantitative Analysis of Funds

    SBC: APPLIED SCIENCES LABORATORY, INC.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Health and Human Services
  6. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase II 1998 Department of DefenseMissile Defense Agency
  7. Small Photon Battery

    SBC: TRACE            Topic: N/A

    The performance and endurance of military electronic equipment depends on the implementation of advanced scientific and engineering technology. Lightweight and inexpensive power supplies with long life would be especially valuable. A useable life greater than four years, independence from solar flux,continuous current, and a materials cost less than $100/Watt-year are advantages offered by photo ...

    SBIR Phase II 1998 Department of DefenseArmy
  8. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase II 1998 Department of DefenseNavy
  9. An Optical Parametric Oscillator Laser (OPOL) AN/GVS-5 Based Mid-Infrared Chemical Remote Sensor

    SBC: LASEN, INC.            Topic: N/A

    Most E-O sensors operate in the visible and the near infrared. These sensors such as silicon and CCD arrays are very well developed resulting in high resolution and low cost. However, these sensors are limited to a spectral response of 900 to 1000nm. The mixing laser (MIXL) uses a non-linear material doped with lasing ions to create a self frequency summing or difference frequency mix ...

    SBIR Phase II 1998 Department of DefenseAir Force
  10. Anechoic Chamber Simulation, Optimization and Synthesis Software Program

    SBC: Voss Scientific, LLC            Topic: N/A

    Commercial and military uses of RF/microwave anechoic chambers to conduct electromagnetic measurements of one type or another has increased considerably in recent years. unfortunately anechoic chambers can be very expensive to build ($0.5M for small chambers, to many $M for large chambers), and operate = man weeks of effort are often required to configure and run a chamber for a specific test. C ...

    SBIR Phase II 1996 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government