Award Data

The Department of Defense and their contractors are currently limited in their ability to fabricate high temperature thermal protection and structural materials and include those materials in new aerospace vehicle designs without risk of thermally induced material failures which might compromise the new designs. Major improvements in structural designs will be difficult without cost effective mat ...

N/A

The problem facing many U. S. high temperature material vendors is the high cost and long span times required for testing with "conventional" techniques. The higher the heat flux required for the test, the more expensive the test, and the more elaborate the facility required. The cost and schedule required for testing by "conventional" means becomes a global competitiveness problem for U. S. hig ...

N/A

The XA2 gasoline burner is widely used by the military to meet a variety of food preparation and heating requirements in the field. Because of the trend toward an single-fuel Army vehicle fleet and away from gasoline as a general purpose fuel, a diesel/JPS fueled burner is sorely needed. A recently developed catalytic vapor generator together with the proposed metal-hydride preheater should prov ...

Imaging spectrometers are a powerful new tool for performing hyperspectral measurements for remote sensing, environmental monitoring, and target detection and characterization applications. The major problem associated with hyperspectral measurements now, however, is not the technology for performing the measurements but rather the technology for analyzing and recording the high data rates genera ...

In order to realize the full potential of cryogenic power converters, it is vital to develop the technology for cryogenic capacitors and inductors, in order to be combined with the switching semiconductors. Capacitors with high dielectric constant and high voltage withstand at cryogenic temperatures with low weight and volume lie on the critical path. The proposed work focuses on innovative tech ...

Proposed is the technical development and design of the electronics and cooling systems for a 1 megawatt cryogenically cooled inverter suitable for use in a wide range of applications, including Uninterruptable Power Suplies (UPS) and motors in the +1000 HP range. The proposed work will provide a logical progression to the development that has already been done by American Superconductor Corp. I ...

This program develops and demonstrates an innovative, low cost, solution and non-vacuum based process for deposition of YBCO on continuous, textured metal tape substrates. It is easily scaleable for long lengths of continuous conductors, and is an inherently more cost effective as it is scaled.Recent advances in the deposition of thick YBCO films have demonstrated that fabricating practical, long ...

This project will conceptually design and demonstrate the feasibility of a multivariate approach to the real-time measurement of cognitive workload, basedon operator psychophysiology as well as behavior, in the context of task demands. Such as approach will facilitate the development of cooperative human-computer controversy over how to implement such capabilities, including how to ascertain the ...