You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 1 - 10 of 25116 results
  1. PREFAB MODULAR LIQUID-COOLED MICRO DATA CENTER

    SBC: Flexnode Inc            Topic: 1

    "To enable the future needs of efficient computing for edge data centers, Flexnode and its partners, the University of Maryland (UMD), Boeing, Iceotope, SHoP Architects, and Arup, propose to develop a prefabricated modular micro data center with unprecedented energy efficiency and power density. The proposed system leverages four key component and system-level technology advancements: (a) a novel, ...

    STTR Phase I 2024 Department of EnergyARPA-E
  2. PREFAB MODULAR LIQUID-COOLED MICRO DATA CENTER

    SBC: Flexnode Inc            Topic: 1

    "To enable the future needs of efficient computing for edge data centers, Flexnode and its partners, the University of Maryland (UMD), Boeing, Iceotope, SHoP Architects, and Arup, propose to develop a prefabricated modular micro data center with unprecedented energy efficiency and power density. The proposed system leverages four key component and system-level technology advancements: (a) a novel, ...

    STTR Phase II 2024 Department of EnergyARPA-E
  3. PREFAB MODULAR LIQUID-COOLED MICRO DATA CENTER

    SBC: Flexnode Inc            Topic: 1

    "To enable the future needs of efficient computing for edge data centers, Flexnode and its partners, the University of Maryland (UMD), Boeing, Iceotope, SHoP Architects, and Arup, propose to develop a prefabricated modular micro data center with unprecedented energy efficiency and power density. The proposed system leverages four key component and system-level technology advancements: (a) a novel, ...

    STTR Phase II 2024 Department of EnergyARPA-E
  4. Cryo Thermal Management of High Power Density Motors and Drives

    SBC: HYPER TECH RESEARCH INC            Topic: 1

    We are solving the need to exceed 12kW/kg power density at takeoff for the motor, drive and thermal management system (TMS) for aircraft propulsion systems, In order to reach the overall systems targets called for in this solicitation, our program goal is to design and demonstrate an electric propulsion motor, drive, and TMS with a takeoff power of 17-20 kW/kg for a 2MW motor that can be scaled to ...

    SBIR Phase II 2020 Department of EnergyARPA-E
  5. Metabolite Reference Standards to Normalize Spatial Metabolomics Across Tissue Sections

    SBC: SYGNAMAP INC            Topic: 1

    Advances in spatial metabolomic analysis of tissue biopsies using MALDI-MSI now enable the identification of numerous biochemical pathways as signatures of specific histopathology features. However, the lack of reproducibility across experimental studies without a common internal standard limits the application of MALDIMSI for drug development. SygnaMap is developing MSI-DeepPath as an innovative ...

    SBIR Phase I 2023 Department of CommerceNational Institute of Standards and Technology
  6. Printable Dielectric for Flexible Hybrid Electronics

    SBC: ChemCubed, LLC            Topic: 2

    The goal for this Phase I research is to develop a stretchable dielectric ink that can be used for flexible applications. Printing electronics is a new and quickly growing alternative to traditionally manufactured electronics. Flexible hybrid electronics (FHE) is a novel approach to electronic circuit manufacturing that aims to combine the best of printed and conventional electronics. FHE devices ...

    SBIR Phase I 2023 Department of CommerceNational Institute of Standards and Technology
  7. Feasibility and proof of concept of a dense, low cost, network of sensors driving Intelligent building Agents for air quality and energy control.

    SBC: XMARK LABS, LLC            Topic: 6

    Commercial buildings use 35% of the entire US energy output, and up to a third of that energy is wasted. Rapidly rising fuel costs, increasing concern about climate change, and policy directives from the Biden Administration are all driving the need for increased energy efficiency and the elimination of waste. At the same time, the COVID-19 pandemic has dramatically increased public awareness of t ...

    SBIR Phase I 2023 Department of CommerceNational Institute of Standards and Technology
  8. Scanning Probe Microscopy with Active Optical Probes: A Novel Approach to Measurements and Nanomanufacturing

    SBC: Actoprobe LLC            Topic: 2

    Actoprobe LLC proposes development of a novel class of Atomic Force Microscopy (AFM) active optical probes with dramatically increased sensitivity and spatial resolution for Near-Field Optical Nanospectroscopy and Nanoscopy. The innovation is accomplished by integrating a diode laser source and a photodetector into a silicon AFM probe in such a way that both the AFM tip and detector are inside the ...

    SBIR Phase I 2023 Department of CommerceNational Institute of Standards and Technology
  9. Sentinel 4.0TM: Measurement and Control System for 3DCP Interlayer Bond Strength

    SBC: APPLIED RESEARCH TRANSFORMATION, PLLC            Topic: 2

    The construction industry is poised for a major transformation through the additive manufacturing approach of field-based concrete printing, an emerging technology using large-scale 3D printers to construct physical infrastructure. Most 3D printing is performed in a controlled environment. In field-based construction, many factors, especially environmental ones, affecting printed concrete product ...

    SBIR Phase I 2023 Department of CommerceNational Institute of Standards and Technology
  10. A Novel Advanced Manufacturing Pathway for Direct Incorporation of Metal-Organic Frameworks in Polymeric Sponges

    SBC: FRAMERGY INC            Topic: 2

    For this project, the team at Framergy, Inc. in partnership with Texas A&M University (TAMU), will analyze the feasibility of post-synthetic incorporation of metal-organic frameworks (MOFs) into polymer composites. This manufacturing method has the distinct advantage of eliminating the synthesis optimization that is often needed in in-situ growth methodologies, while also allowing for a higher de ...

    SBIR Phase I 2023 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government