List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Non-Contaminating Compressor for Closed-Cycle Cryocoolers

    SBC: CREARE LLC            Topic: BMDO90003

    Creare will develop a compressor that works atcryogenic temperatures: 80K or nearly 350 degress below zero fahrenheit. The compressor works at high pressures for Joule-Thompson (J-T cryocoolers. J-T cryocoolers contain heat exhangers and expansion elements that are orders of magnitude smaller than Reverse Brayton or Stirling cryocoolers. Further, J-T cryocoolers contain no active components in the ...

    SBIR Phase II 1991 Department of DefenseMissile Defense Agency
  2. APPLICATION SPECIFIC INTEGRATED CIRCUIT TO IMPROVE RELIABILITY AND POWER QUALITY AND TO REDUCE COST OF PCS CONTROL

    SBC: Abacus Controls, Inc.            Topic: N/A

    POWER CONDITIONERS CURRENTLY IN USE IN PHOTOVOLTAIC COGENERATION INSTALLATIONS DO NOT USE LARGE SCALE INTEGRATION TECHNOLOGY. IT IS THE OBJECTIVE IN PHASE I TO RESEARCH THE FEASIBILITY OF IMPROVING THE ACCURACY, SPEED OF RESPONSE, AND THE RELIABILITY OF A POWER CONDITIONER BY UTILIZING A COMMERCIALLY AVAILABLE ASIC. MANUFACTURING COSTS WILL BE SIGNIFICANTLY REDUCED WITH THE ASIC IMPLEMENTED SAMPLE ...

    SBIR Phase II 1991 Department of Energy
  3. MATERIALS AND PROCESSES FOR ASEROSPACE RTM

    SBC: Abaris            Topic: N/A

    THE U.S. AIR FORCE HAS AN INTEREST IN HIGH RATE, LOW COST, PRODUCTION PROCESSES FOR AIRCRAFT PARTS. ABARIS PROPOSES A COMBINED ANALYSIS AND TESTING PROJECT TO EXPLORE MODIFYING PRESENT RESIN TRANSFER MOLDING (RTM) TECHNIQUES TO EVALUATE THE FEASIBILITY OF THEIR USE IN THE PRODUCTION OF HIGH PERFORMANCE, AEROSPACE, COMPOSITE MATERIALS. EPOXY RESINS SHALL BE UTILIZED IN COMBINATION WITH GRAPHITE REI ...

    SBIR Phase I 1991 Air ForceDepartment of Defense
  4. DESIGN AND DEVELOPMENT OF ADHESIVELY BONDED JOINTS

    SBC: Abaris            Topic: N/A

    THE U.S. ARMY HAS A NEED FOR A LIGHTWEIGHT, STRONG, MOBILE BRIDGE. ONE PROBLEM THAT LIMITS THE PERFORMANCE IS THE DESIGN OF ADHESIVE JOINTS. THIS PROJECT IS TO DEVELOP SEVERAL OPTIMUM JOINT DESIGNS SO THAT THE LOADS ON JOINTS OF EITHER TUBULAR AND FLAT COMPONENTS ARE IN SHEAR, AND THE STRESS CONCENTRATIONS ARE REDUCED. THE PROPOSED PROGRAM IS TO USE THE RESEARCH WE HAVE ACCOMPLISHED IN EXPERT SYST ...

    SBIR Phase I 1991 ArmyDepartment of Defense
  5. BLOOD CELL TYPING USING OPTICAL PHASE AND FLOW CYTOMETRY

    SBC: ABIOMED, INC.            Topic: N/A

    LABOR SAVING TECHNIQUES ARE ESSENTIAL GIVEN THE CURRENT PRESSURE ON CLINICAL COST CONTAINMENT. SINCE BLOOD CLASSIFICATION AND SCREENING IS A NOTORIOUSLY LABOR INTENSIVE AREA OF THE CLINICAL LABORATORY, MANUFACTURERS HAVE CONCENTRATED ON DEVELOPING VARIOUS ABO/RH TYPING TECHNIQUES. FEW OF US RECOGNIZE THE SPECIALIZATION NEEDED IN PERFORMING SUCH TESTS, AND THE MINOR IMPACT THESE TESTS HAVE HAD IN T ...

    SBIR Phase I 1991 Department of Health and Human Services
  6. MINIATURE IMPLANTABLE TRANSCUTANEOUS OPTICAL DATA LINK

    SBC: ABIOMED, INC.            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of Health and Human Services
  7. THE CONTROL INTERFACE ASSESSMENT SYSTEM

    SBC: ACADEMIC SOFTWARE, INC.            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of Health and Human Services
  8. A CATALYTIC THERMAL MANAGEMENT SYSTEM FOR HYDROGEN-FUELED INJECTION VEHICLES

    SBC: Accel Catalysis Inc.            Topic: N/A

    A COOLING STRATEGY UTILIZING THE ENDOTHERMICITY OF THE PARA- TO ORTHO-HYDROGEN CONVERSION HAS POTENTIAL FOR MEETINGTHE REQUIREMENTS OF AN ADVANCED SUBSYSTEM FOR THERMAL MANAGEMENT IN HYDROGEN-FUELED INJECTION VEHICLES. THE PROPOSED EFFORT WILL DETERMINE THE FEASIBILITY OF DEVELOPINGSUCH A COOLING SYSTEM USING NEW ALUMINA-SUPPORTED FORMULATIONS AS CATALYSTS FOR THE INTERCONVERSION OF PARA- AND ORTH ...

    SBIR Phase II 1991 National Aeronautics and Space Administration
  9. TECHNOLOGY INNOVATIONS FOR VACCUM ARC ION SOURCES

    SBC: Acceleration Consultants Inc            Topic: N/A

    ION SOURCES BASED ON VACUUM ARC TECHNOLOGY HAVE SEVERAL IMPORTANT ADVANTAGES. THEY CAN GENERATE A WIDE VARIETY OF METAL IONS, PRODUCE HIGH CURRENT FRACTIONS OF MULTIPLY-CHARGED IONS, AND ARE EASY TO OPERATE. UNFORTUNATELY, EXISTING ARC SOURCES HAVE TECHNOLOGICAL DRAWBACKS. A STABLE DISCHARGE REQUIRES HIGH CURRENT (>200A), LIMITING THE SOURCE PULSE LENGTH AND LIFETIME. IN THIS PHASE I PROJECT, IMPR ...

    SBIR Phase I 1991 Department of Energy
  10. DEVELOPMENT OF A NIOBIUM SUPERCONDUCTING RF QUADRUPOLE LINAC

    SBC: Accsys Technology, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of Energy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government