You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. MINIATURE, RADIATION HARD ACCELEROMETER FOR KINETIC ENERGY VEHICLE

    SBC: Silicon Designs, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseMissile Defense Agency
  2. NUMERICAL MODELING OF NOSETIP GASJET AT HYPERSONIC SPEED

    SBC: Flow Research Inc            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseAir Force
  3. ULTRA-TRACE MATERIALS ANALYSIS USING RIS

    SBC: ATOM SCIENCES, INC.            Topic: N/A

    REQUIREMENTS FOR MATERIAL CHARACTERIZATION ARE BECOMING MORE STRINGENT AS THE ROLE OF THE TRACE ELEMENT COMPOSITION OF HIGHTECHNOLOGY DEVICES BECOMES APPARENT. IN SEMICONDUCTOR RESEARCH, FOR INSTANCE, THERE IS A NEED FOR ULTRA-TRACE ELEMENT ANALYSIS IN SOLIDS BELOW THE PPBA LEVEL WITH SPATICAL RESOLUTION IN THE FEW MICRON RANGE. RESONANCE IONIZATION SPECTROSCOPY (RIS) INVOLVES THE STEPWISE EXCITAT ...

    SBIR Phase I 1986 Department of DefenseAir Force
  4. THIS PROJECT PROPOSES TO CONDUCT A LIMITED NUMBER OF MUCK FLOW EXPERIMENTS USING A CONTROLLED MUCK MATERIAL AND A SPECIALLY FABRICATED CHUTE SYSTEM.

    SBC: Shannon & Wilson Inc            Topic: N/A

    THIS PROJECT PROPOSES TO CONDUCT A LIMITED NUMBER OF MUCK FLOW EXPERIMENTS USING A CONTROLLED MUCK MATERIAL AND A SPECIALLY FABRICATED CHUTE SYSTEM. THE PROJECT WILL ATTEMPT TO DETERMINE HOW SOME OF THE FLOW FACTORS INTERACT WITH ONE ANOTHER TO INFLUENCE MUCK FLOW RATE. MEASUREMENTS OF MASS FLOW RATE IN TERMS OF THE RATE OF MUCK ACCUMULATION AT THE END OF THE CHUTE WILL BE MADE FOR 2 CHUTE ANGLES ...

    SBIR Phase I 1986 Department of DefenseAir Force
  5. AN ON-LINE X-RAY DIFFRACTION METHOD FOR DETERMINING GRAIN SIZE IN POLYCRYSTALLINE MATERIALS

    SBC: TECHNOLOGY FOR ENERGY CORP.            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseArmy
  6. AIRCRAFT COMPONENTS WHICH UTILIZE THERMOPLASTIC COMPOSITES OFFER SIGNIFICANT ADVANTAGES OVER METALLIC STRUCTURES DUE TO THE COMBINATION OF REDUCED WEIGHT AND INCREASED STRENGTH INHERENT IN COMPOSITE STRUCTURES.

    SBC: Taylor S R & Assocs            Topic: N/A

    AIRCRAFT COMPONENTS WHICH UTILIZE THERMOPLASTIC COMPOSITES OFFER SIGNIFICANT ADVANTAGES OVER METALLIC STRUCTURES DUE TO THE COMBINATION OF REDUCED WEIGHT AND INCREASED STRENGTH INHERENT IN COMPOSITE STRUCTURES. FABRICATION OF THERMOPLASTIC COMPOSITES IS PLAGUED BY POROSITY OR VOIDS IN THE CONSOLIDATED PART, POOR, INEFFICIENT FIBER WETTING AND DIFFICULT CONTROL OF RESIN FLOW AND CRYSTALLINITY. ULTR ...

    SBIR Phase I 1986 Department of DefenseAir Force
  7. A DUAL LEVEL TEMPERATURE WARNING SWITCH IS TO BE DESIGNED, PROTOTYPED, AND VERIFIED TO MEET TECHNICAL SPECIFICATIONS.

    SBC: TECHNOLOGY FOR ENERGY CORP.            Topic: N/A

    A DUAL LEVEL TEMPERATURE WARNING SWITCH IS TO BE DESIGNED, PROTOTYPED, AND VERIFIED TO MEET TECHNICAL SPECIFICATIONS. THE PROTOTYPE DUAL LEVEL TEMPERATURE WARNING SWITCH WILL BE DESIGNED IN MINIATURE, MAKING IT INTERCHANGEABLE WITH THE CURRENT SINGLE LEVEL TEMPERATURE WARNING SWITCH SPECIFIED IN MIL-S-12285/2C, 22 JULY 1975. THE PHASE I RESULTS WILL ESTABLISH THE VIABILITY OF THE DESIGN. THE MANUF ...

    SBIR Phase I 1986 Department of DefenseArmy
  8. A PREDICTION MODEL FOR ADVANCED LEADING-EDGE VORTEX FLOW CONTROL

    SBC: TARGAZYME, INC.            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseAir Force
  9. IN REMOVING PAINT FROM FIBER COMPOSITE COMPONENTS, TRADITIONAL PROCEDURES SUCH AS PLASTIC BEAD BLASTING HAVE BEEN SHWON TO LEAD TO REMOVAL OF THE GEL COAT, EXTENSIVE FIBER BREAKAGE AND MATRIX DEBONDING WHICH RESULTS IN LOSSES OF UP TO 30% IN THE

    SBC: Taylor S R & Assocs            Topic: N/A

    IN REMOVING PAINT FROM FIBER COMPOSITE COMPONENTS, TRADITIONAL PROCEDURES SUCH AS PLASTIC BEAD BLASTING HAVE BEEN SHWON TO LEAD TO REMOVAL OF THE GEL COAT, EXTENSIVE FIBER BREAKAGE AND MATRIX DEBONDING WHICH RESULTS IN LOSSES OF UP TO 30% IN THE MATRIX-DOMINATED MECHANICAL PROPERTIES AND MINOR LOSSES IN THE FIBER-DOMINATED PROPERTIES. VERY RECENT PRELIMINARY RESULTS ACHIEVED BY US INDICATE THAT TH ...

    SBIR Phase I 1986 Department of DefenseAir Force
  10. FATIGUE LIFE ENHANCEMENT OF BUSHED TITANIUM LUGS WILL BE INVESTIGATED.

    SBC: Fatigue Technology Inc            Topic: N/A

    FATIGUE LIFE ENHANCEMENT OF BUSHED TITANIUM LUGS WILL BE INVESTIGATED. A UNIQUE TECHNBIQUE, FORCEMATE (FM), FOR INSTALLATION OF BUSHINGS WILL BE DEMONSTRATED. EFFECT OF PROCESS PARAMETERS WILL BE EVALUATED AND THOSE PARAMETERS OPTIMIZED FOR THE PARTICULAR CONFIGURATION UNDER INVESTIGATION. AT EACH PHASE OF THE INVESTIGATION, FATIGUE LIFE COMPARISONS WILL BE MADE BETWEEN LUGS AND BUSHINGS INSTALLED ...

    SBIR Phase I 1986 Department of DefenseNavy
US Flag An Official Website of the United States Government