You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: Sixpoint Materials, Inc. Topic: N/A
SixPoint Materials will create low-cost, high-quality vertical gallium nitride (GaN) substrates using a multi-phase production approach that employs both hydride vapor phase epitaxy (HVPE) technology and ammonothermal growth techniques to lower costs and maintain crystal quality. Substrates are thin wafers of semiconducting material needed for power devices. In its two-phase project, SixPoint Mate ...STTR Phase I 2014 Department of EnergyARPA-E
Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care ApplicationsSBC: GENECAPTURE, INC. Topic: CBD15C001
The modern warfighter faces the constant threat of endemic infections, multi-drug resistant bacteria and Biological Warfare Agents. In order to provide accurate front-line treatment that will curtail the overuse of antibiotics, a rapid and robust moleculaSTTR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
SBC: Luna Innovations Incorporated Topic: DHA17A002
Medical moulage is used in medical training to simulate injuries or pathologies, however current moulage is static and does not provide the trainee feedback on the quality of care or ultimate outcome of that care. Allowing a trainee to witness the injury or pathology -morph- while treatment is being provided can provide feedback on any potential mistreatment and enhance the learning and proficienc ...STTR Phase I 2017 Department of DefenseDefense Health Agency
SBC: MATSYS INC Topic: DTRA16A002
MATSYS proposes to develop, test and evaluate a scalable metal-based reactive structural material that will self-fragment to micron or sub-micron scale fuel particles when subjected to explosive shock loading, resulting in significantly enhanced metal combustion efficiency. Use of reactive material casings offers the potential for several-fold increases in blast and overpressure by generating rapi ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
SBC: MATSYS INC Topic: DTRA16A001
MATSYS proposes to adapt emerging additive manufacturing techniques (so-called 3-D Printing) for use with reactive structural materials and demonstrate this capability to rapidly fabricate reactive case. Our concept incorporates two major manufacturing steps: 3D printing of green compacts from pure Al or Al-based reactive powder blend; and Microwave (MW) sintering of green compacts into net-shaped ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitionsSBC: MAKEL ENGINEERING, INC. Topic: DTRA16A001
This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
SBC: CFD RESEARCH CORPORATION Topic: DTRA16A003
Cost-effective application of advanced commercial electronics technologies in DoD space systems requires early development of radiation-hardened-by-design (RHBD) techniques, and use of simulations is critical to the efficiency of this process. CFDRC has developed an integrated, mixed-mode simulation approach allowing their NanoTCAD device physics simulator to interface with commercial circuit simu ...STTR Phase I 2017 Department of DefenseDefense Threat Reduction Agency
SBC: CFD RESEARCH CORPORATION Topic: DHP16A001
Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...STTR Phase I 2016 Department of DefenseDefense Health Agency
Mask integrated Volatile Organic Compound (VOC) sensor for real-time warfighter physiological status monitoring in extreme and toxic environmentsSBC: BAYSPEC, INC. Topic: DHP16C002
BaySpec Inc., in collaboration with Pacific Northwest National Laboratory, proposes to develop an innovative orthogonal sensor systemthat would be able to detect, identify and quantify the inorganic components of breathing mixes, (i.e., nitrogen, oxygen, carbon dioxide, argon, helium, and water vapor), as well as individual detectable VOCs within the exhaled breath in real-time. The Phase I resear ...STTR Phase I 2017 Department of DefenseDefense Health Agency
SBC: TConneX Inc. Topic: DHP16C001
Estimation of the primary parameters like IC 50 in traditional dose-response modelsmay fail or lead to misleading results when the observations are non-onotonic due to drugresistance or virus mutation in various biomedical lab research. The objective of this project isto develop a novel approach to assess dose response relationship, which is applicable to generalpharmacologic, toxicologic, or othe ...STTR Phase I 2017 Department of DefenseDefense Health Agency