You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: Modulated Imaging Inc. Topic: DHA17A006
There is a lack of quantitative tools to accurately map tissue viability in a rapid and quantitative manner so a surgeon can properly excise tissue prior to grafting. Spatial Frequency Domain Imaging (SFDI) is an optical method that has been shown to be a reliable method for physiology assessment - particularly for burn depth. SFDI measures of tissue structure (scattering) and function (hemoglobi ...STTR Phase I 2017 Department of DefenseDefense Health Agency
SBC: UTOPIACOMPRESSION,CORPORATION Topic: DHP16C005
The goal of this STTR effort is to design a portable, multimodal, non-contact imaging system for burn depth diagnosis and tracking of wound healing. UC and Vanderbilt University will build upon our previous efforts demonstrated via porcine model studies to combine results from structural B-mode optical coherence tomography (OCT) images and functional data (pulse speckle imaging- PSI) to classify d ...STTR Phase I 2017 Department of DefenseDefense Health Agency
SBC: MAKEL ENGINEERING INC Topic: DHP16C002
Makel Engineering, Inc. and Sandia National Laboratories propose to demonstrate an advanced multi-modal sensor system suitable for in-situ analysis of exhaled VOCs for pilots, divers and field patients. Our proposed system will combine a micro-gas chromatograph (GC) and miniature ion mobility spectrometer (IMS) for detection of trace amounts of exhaled breath VOCs with miniature solid state sensor ...STTR Phase I 2017 Department of DefenseDefense Health Agency
Mask integrated Volatile Organic Compound (VOC) sensor for real-time warfighter physiological status monitoring in extreme and toxic environmentsSBC: BAYSPEC, INC. Topic: DHP16C002
BaySpec Inc., in collaboration with Pacific Northwest National Laboratory, proposes to develop an innovative orthogonal sensor systemthat would be able to detect, identify and quantify the inorganic components of breathing mixes, (i.e., nitrogen, oxygen, carbon dioxide, argon, helium, and water vapor), as well as individual detectable VOCs within the exhaled breath in real-time. The Phase I resear ...STTR Phase I 2017 Department of DefenseDefense Health Agency
SBC: RADIATION DETECTION TECHNOLOGIES INC Topic: DTRA14B005
At the completion of the research and development effort a Li-foil multi-wire proportional counter (MWPC) neutron detector with more than 625-cm2 of active area will be included in a portable radiation detection system. The system is expected to outperform the standards set by the ANSI N42.53 standards, and gamma-ray rejection ratio (GRR) of 1.0x10-8 or better. A gamma-ray spectrometer for isotope ...STTR Phase II 2017 Department of DefenseDefense Threat Reduction Agency
SBC: CFD RESEARCH CORPORATION Topic: DTRA16A003
Cost-effective application of advanced commercial electronics technologies in DoD space systems requires early development of radiation-hardened-by-design (RHBD) techniques, and use of simulations is critical to the efficiency of this process. CFDRC has developed an integrated, mixed-mode simulation approach allowing their NanoTCAD device physics simulator to interface with commercial circuit simu ...STTR Phase I 2017 Department of DefenseDefense Threat Reduction Agency
SBC: RELIABLE MICROSYSTEMS LLC Topic: DTRA16A003
Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitionsSBC: MAKEL ENGINEERING INC Topic: DTRA16A001
This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC. Topic: DTRA16A004
For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
SBC: CFD RESEARCH CORPORATION Topic: DHP16A001
Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...STTR Phase I 2016 Department of DefenseDefense Health Agency