Award Data

To increase the utilization of electric vehicles, the US Department of Energy is seeking to reduce the cost of electric vehicle batteries to less than $125/kWh by 2022. To achieve this goal, the costs of cathode materials, which account for approximately 30% of the cost of vehicle batteries, must be reduced significantly. To address the challenge of lowering the costs of advanced lithium battery c ...

This Small Business Technology Transfer (STTR) program aims at development and demonstration of an integrated theoretically/experimentally combinatorial method for the accurate prediction of rheological behaviors of special polymer solutions. In-depth understandings of dynamic responses of the polymer solutions under external shear are essential for development of the “smart” polymer-based add ...

"The next generation of very high field accelerator magnets (20 T or more) are expected to be made with high-temperature superconductors (HTS) along with conventional low-temperature superconductors (LTS) to reduce cost. The operation and protection of these magnets becomes very challenging particularly if the HTS coils are made with the tapes and operate at a much lower current than the LTS coils ...

Accurate simulation of nuclear power plant behavior is necessary for both engineering and training applications. An engineering grade simulator, used for design, safety analysis and operations, is characterized by high fidelity, computational power, lack of real-time capability, and user non-interactive environment. By contrast, a training grade simulator, used for operator training and education, ...

Sn-doped In2O3 (ITO) is the industry standard and most widely used transparent conducting electrode (TCE) because of its good electrical and optical properties. However, ITO has a number of disadvantages: ITO is not a suitable TCE for next-generation, high-efficiency, flexible OLEDs, because of its inappropriate work function, difficulty in creating desired patterns, low stability, delaminantion d ...

Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

Renewable algae fuels are the source of energy for the future. It was demonstrated that algae fuels can be produced and they were successfully used in demonstration airplane flights and cars. The cost of algae oil is still high and cannot compete with fossil fuels. High algae growth and ability to accumulate oil fast are the key factors that will make algae based biofuels affordable. Diatoms are t ...

For economically viable large-scale production of microalgae based food and biofuel to become a reality, significant improvements in algal productivity need to be achieved. With current regulatory guidelines, large scale outdoor cultivation of microalgae for these products restricts the use of transgenic algal strains, which in the laboratory, have thus far been the primary strategy taken to effec ...

To advance a strong and economical biofuels and bioproducts industry, tools are needed for breeding microalgae to improve phenotypes of commercial interest, including biomass yield, culture stability, harvestability, and accumulation of valuable compounds. This project aims to increase biomass feedstock yields by the phototrophic green alga Scenedesmus obliquus by using classical breeding approach ...

Hig e and advanced materials are continually demanding higher magnetic fields. Efforts to generate fields in excess of 25 Tesla have been a principal driver of high temperature superconductor research. Although HTS materials were discovered decades ago and have always shown significant potential for high field use, until recently magnets using the technology have remained elusive. Great progress h ...