Award Data

During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

Our goal in this Phase II effort is to construct and test a compact, robust testbed for generating laser-cooled strontium atoms on a mobile platform. The focus of the Phase I effort was designing and fabricating an ovenized strontium source that also serves as a 2D+ MOT cell. In Phase II, we will integrate the strontium source into an all-glass-and-silicon vacuum system maintained by a miniature i ...

The objective of this project is to advance the capabilities of the Coastal Battlefield Reconnaissance and Analysis (COBRA) system by creating a Surf Zone Modelling Tool (SZT) that can create realistic synthetic imagery of the surf zone (SZ). Through the use of this synthetic imagery the COBRA Program will be enabled to inform concept of operations (CONOPS) in unfamiliar environments as well as mo ...

Current design tools for gas turbine engines invoke a variety of simplifying assumptions to estimate heat transfer to solid/metal engine components (e.g., isothermal boundary conditions). These approximations are often not valid, result in inaccurate predictions of heat transfer, and ultimately compromise the thermal integrity of propulsion and power systems. Wall-modeled large eddy simulation (WM ...

The US Navy faces daunting energy challenges that will further increase in severity, given the ever-increasing global demand for energy, diminishing energy supplies and demand for enhanced environmental stewardship. Additionally, noise is an important issue for the Navy due to the adverse effect it has on personnel and communities around naval air bases and training sites. Military combat aircraft ...

Toyon Research Corporation, together with the University of California, Santa Barbara (UCSB) propose to demonstrate a GPS-denied Local Carrier-based Precision Approach and Landing System (LC-PALS) that enables 3-D position, navigation and time (PNT) for platforms within range of an aircraft carrier equipped with one or more ADEPT-compliant beacons. Unlike the Global Positioning System (GPS), which ...

This proposal is a collaborative effort between MRV Systems and the Woods Hole Oceanographic Institution. The goal is to develop a new, small, inexpensive autonomous vehicle to investigate mixed layer dynamics and turbulent mixing. The preliminary Phase I design, a Diagonally Operating Platform (DOP), is a profiling float with moveable fins. DOP will turn toward an intended direction within a few ...

In this Phase II Small Business Innovation Research project we will be developing extremely efficient (40G), and compact modulators suitable for microwave analog links, next generation radar and other military applications. III-V semiconductor nanowires a

Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...

Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...