You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. High Power Density Structural Heat Spreader

    SBC: Thermavant Technologies, L.L.C.            Topic: AF151094

    This Sequential Phase II effort will demonstrate the micro-loop oscillating heat pipe heat spreader technology (m-Loop-OHP-HS) for solid state power amplifiers in a real-world spacecraft structure to advance its technology readiness level for near-term insertion into programs of record. Additionally, the m-Loop-OHP-HS technology will be prototyped in novel materials and form factors to create mult ...

    SBIR Phase II 2019 Department of DefenseAir Force
  2. A Novel, Nanostructured, Metal-Organic Frameworks-Based Pretreatment Technology for the Remediation of PFAS in Industrial Wastewater

    SBC: Framergy, Inc.            Topic: 18NCER1C

    Per- and polyflouralkyl substances, otherwise known as PFAS, are a large group of chemicals including perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS). These chemicals have a large variety of uses globally. Remediation of PFAS has gained importance due to their environmental persistence and toxicity. Water treatment methods must combine multiple strategies to be effective, as PF ...

    SBIR Phase I 2019 Environmental Protection Agency
  3. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 18NCERP2

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logisticalsystem requires natural gas gathering lines, processing facilities,product storage tanks and Jots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermitte ...

    SBIR Phase II 2019 Environmental Protection Agency
  4. High Power Density Source for Space Applications

    SBC: Thermavant Technologies, L.L.C.            Topic: MDA18020

    The proposed Phase I effort aims to develop a small satellite energy storage solution that enables high power density Li-ion cells to be emplaced in compact payload or bus modules without the thermal management risks imposed by status quo battery packaging technologies. The key feature proposed herein is a “passive and thermally-intelligent” but mechanically sound package structure built with ...

    SBIR Phase I 2019 Department of DefenseMissile Defense Agency
  5. Improved still frames and denoised motion imagery from distressed full motion video (FMV)

    SBC: LICKENBROCK TECHNOLOGIES, INC.            Topic: NGA191004

    The National Geospatial Intelligence Agency (NGA) and other Department of Defense (DoD) agencies use geospatial intelligence (GEOINT) derived from motion imagery to support U.S. national security. Full motion video (FMV) captured from airborne platforms is subject to multiple distortions and noise due to atmospheric disturbance, obscuration (dust, haze, smoke, and mist), and transmission defects s ...

    SBIR Phase I 2019 Department of DefenseNational Geospatial-Intelligence Agency
  6. Compact Radio Frequency-to-Optical Transmitter for Airborne Military Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: N191006

    In this SBIR effort we will develop an ultra-compact, high-speed, low RIN and high-power transmitter for high-performance RF photonic link applications based on our cutting-edge lithium niobate on insulator (LNOI) modulator. In phase I, we will design, fabricate and characterize a low Vp, push-and-pull LNOI modulator. We will study the optical couplings at the laser/modulator/fiber interfaces to a ...

    SBIR Phase I 2019 Department of DefenseNavy
  7. High energy density radioisotope batteries for highly stable and long-term reliable power generation

    SBC: Infinity Power LLC            Topic: N191041

    Nuclear batteries have enormous potential as power sources and have many benefits over other types of portable power sources. Nuclear batteries can provide power for at least as long as the isotope half-life and the energetic nature of nuclear radiation means that only a small mass of radioisotope material is required to achieve a high power output and therefore they can have power densities that ...

    SBIR Phase I 2019 Department of DefenseNavy
  8. 1 Micron Fiber Optic Receiver for Mil-Aero Environment

    SBC: Phase Sensitive Innovations, Inc.            Topic: N171031

    In this SBIR effort we will collaborate with Dr. J.C. Campbell’s research group at the University of Virginia (UVA) in developing a high-power, high-speed, high-linearity photodiode (PD) receiver optimized for operation at 1 micron wavelength. In phase II, we will fabricate, characterize, package and commercialize the 1 micron photodiode that we have successfully designed and studied in our phas ...

    SBIR Phase II 2019 Department of DefenseNavy
  9. Enhancement of Interactive Structural Analysis Environment and Management System (iSAMS)

    SBC: Engineering Software Research And Development, Inc.            Topic: N03169

    An Interactive Structural Analysis Environment and Management System (iSAMS), designed to support the practice of simulation governance of engineered repairs of metallic and composite aircraft structures, is enhanced, certified and deployed for production deployment. Repairs to modern military aircraft require certified engineering analysis methods. Methods have evolved with the history of airfram ...

    SBIR Phase II 2019 Department of DefenseNavy
  10. Innovative Approaches for the Flaw-Tolerant Design and Certification of Airframe Components

    SBC: Engineering Software Research And Development, Inc.            Topic: N08131

    The computational framework designed to meet the technical requirements of Simulation Governance with the goal of enabling reliable predictions of damage accumulation caused by cyclic loading in metallic airframe components that have small initial flaws, will be validated at the component level. The predictive performance of the model to determine the remaining fatigue life of mechanical component ...

    SBIR Phase II 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government