List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Commercial Solutions for Weather Forecasting

    SBC: Phase Sensitive Innovations, Inc.            Topic: AF182001

    Accurate and timely weather information for situational awareness is critical to the success of Air Force missions.To date, space-borne sensors for weather forecasting primarily include visible, infrared, and microwave instruments.While visible and infrared sensors have reached a high level of maturity and performance, those operating in the microwave region of the electromagnetic spectrum continu ...

    SBIR Phase I 2019 Department of DefenseAir Force
  2. Commercial Solutions for Weather Forecasting

    SBC: Nextgen Federal Systems LLC            Topic: AF182001

    Soil moisture is an important parameter for AF weather measurements and forecasting.It impacts Army operations (off-road mobility, land operations) and Intelligence Communitys knowledge (agriculture: social unrest).AF has classified soil moisture measurements and data as a DoD space-based environmental monitoring gap.If unmitigated, the lack of soil moisture data will diminish our asymmetric advan ...

    SBIR Phase I 2019 Department of DefenseAir Force
  3. ANGRIBRD: ANGR for Intelligent Binary Runtime Defense

    SBC: Computer Measurement Laboratory, LLC            Topic: AF182104

    This project will investigate the use of offensive binary analysis techniques to extract data from program binaries for use by a runtime diagnostic engine capable of malware detection and response. The open-source Angr framework provides the basis for the tools used to collect the analysis data needed to support a diagnostic engine. A diagnostic engine capable of using these collected results will ...

    SBIR Phase I 2019 Department of DefenseAir Force
  4. Autonomous Environmental Routing Onboard (AERO)

    SBC: Nextgen Federal Systems LLC            Topic: A17026

    The Autonomous Environmental Routing Onboard (AERO) system is an innovative software-hardware solution that performs onboard processing of environmental information from multiple sources to execute autonomous route adjustments for Unmanned Aircraft Systems (UASs). This processing and resulting autonomy minimizes negative environmental impacts while leveraging advantageous conditions for executing ...

    SBIR Phase II 2019 Department of DefenseArmy
  5. Development of In-Process Monitoring Closed-Loop Feedback for Use in Aluminum Alloy Additive Manufacturing (AM) Applications

    SBC: SENTIENT CORPORATION            Topic: A17003

    The overall goal of this project is to develop an in-process defect monitoring and correction technique for additive manufacturing (AM) of aluminum alloy to improve repeatability for geometric dimensions, material properties, and quality. In Phase I, Sentient collaborated with Johns Hopkins University Applied Physics Lab, and successfully completed all proposed tasks demonstrating two key capabili ...

    SBIR Phase II 2019 Department of DefenseArmy
  6. Compact Radio Frequency-to-Optical Transmitter for Airborne Military Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: N191006

    In this SBIR effort we will develop an ultra-compact, high-speed, low RIN and high-power transmitter for high-performance RF photonic link applications based on our cutting-edge lithium niobate on insulator (LNOI) modulator. In phase I, we will design, fabricate and characterize a low Vp, push-and-pull LNOI modulator. We will study the optical couplings at the laser/modulator/fiber interfaces to a ...

    SBIR Phase I 2019 Department of DefenseNavy
  7. Image Enhancement and Machine Learning for Improving Man-Portable Targeting Systems

    SBC: EM PHOTONICS INC            Topic: N172102

    Modern DoD applications are benefiting from the proliferation of EO/IR sensor technology. As imagers become cheaper and smaller, they are being more widely deployed for a variety of scenarios. This trend is exemplified by the Navys Future Targeting System (FTS), which will provide laser designation, laser spot imaging, and some target location functions in a single 5.5-pound unit, replacing discre ...

    SBIR Phase I 2018 Department of DefenseNavy
  8. Metal Matrix Composite Axial Propulsion Missile Components

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: MDA05068

    The overall objective of the proposed effort is to more fully develop a solid rocket motor case based on aluminum metal matrix composites (Al MMC) that will maintain or increase the performance of Navy rocket motors and improve compliance with insensitive munitions (IM) requirements. Touchstone Research Laboratory will use a modified filament winding process for producing Al MMC cases for technolo ...

    SBIR Phase II 2018 Department of DefenseNavy
  9. Fiber Reinforced Aluminum Crack Repair for Aluminum Structures

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: N161069

    Touchstone proposes to build on the Phase I effort to incorporate its MetPreg fiber reinforced aluminum material into a concept for bonded-on repairs to cracked aluminum ship hulls and superstructure. The method would not require logistics beyond that which is normally available to ships force or entail the use of materials with short shelf life. MetPreg has been shown to arrest cracks in 7xxx ser ...

    SBIR Phase II 2018 Department of DefenseNavy
  10. Innovative Processing Techniques for Additive Manufacture of 7000 Series Aluminum Alloy Components

    SBC: SENTIENT CORPORATION            Topic: N18AT005

    To address the needs of Navy to successfully produce 7000 series aluminum alloy components, Sentient proposes to develop a hybrid additive manufacturing (AM) process for this topic. Hybrid AM use a secondary process (e.g. peening, burnishing) along with primary AM process to tightly control thermal profile and stress evolution locally and globally, resulting enhanced part quality (e.g. negligible ...

    STTR Phase I 2018 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government