Award Data

Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

Additive Manufacturing (AM) is a modern and increasingly popular manufacturing process for metallic components, but suffers from well known problems of inconsistent quality of the finished product. Process monitoring and feedback control are therefore crucial research areas with a goal of solving this problem. To address this concern, X-wave Innovations, Inc. (XII) and the University of Dayton Res ...

Phase I objective is to demonstrate the feasibility of our proposed passivation approach to minimize the dark current noise and improve the quantum efficiency in the GaSb based type II superlattice detectors. Phase I goal is to demonstrate the feasibility of our technology to fabricate photodiodes with cut-off wavelength in excess of 10µm, quantum efficiency exceeding 70% and dark current density ...

Hypersonic missile defense systems are being designed to reach global threats. During flight, external surfaces are predicted to reach temperatures in excess of 2200C. As a result, innovative, high performance thermal protection systems (TPS) are of great demand. Among ultra-high temperature ceramics (UHTC), it is well known that ZrB2- and HfB2-based materials have high melting temperatures and ...

There is an urgent need to bypass or cross the blood brain barrier (BBB) to deliver drugs for TBI treatment. This project aims to develop targted intranasally delivered, magnetically propulsed, and targted nanoparticles for traumatic brain injury (TBI). In Phase I, we will demonstrate the design, fabrication, and in vitro characterization of proposed drug laden magnetic nanoparticles as well as co ...

Aegis BMD 5.0 CU will expand and update the Baseline 9 MRBM and IRBM threat set, while Aegis BMD 5.1 will have capabilities against more sophisticated short to intermediate range ballistic missiles. An ability to discriminate this wider set of increasingly sophisticated threats is essential. Technology Service Corporation (TSC) and the Michigan Tech Research Institute (MTRI) propose to identify fe ...

Gallium Nitride (GaN) substrates are ideal materials for fabrication of high-power and high-frequency devices based on III-V materials. The current state-of-the-art Chemical Mechanical Polishing (CMP) methods are plagued by several challenges, including, surface charge affects due to surface contamination, and sub-surface damages, which can limit the quality of III-V devices. Furthermore, there is ...

San Diego Composites (SDC), Inc. is teamed with the University of Maine and Raytheon Missile Systems to provide the solution for corrosion of Missile Defense Agency assets in harsh marine environments: innovative design and application of high performing composite components. It is well known that composite materials are inherently corrosion resistant and possess superior properties that can be ...

The objectives of our Phase I effort are to characterize target sensor measurement uncertainties and feature extraction uncertainties; determine how and where, in the processing chain, these affect target discrimination and classification; show how the different sources of uncertainty lead to the cumulative uncertainty in the final decision; provide techniques that will be instrumental to optimizi ...