You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: ACTA, LLC Topic: T5
ACTA and Sandia National Laboratories propose to quantify and propagate substructure modeling uncertainty for reduced-order substructure models to higher levels of system assembly, thereby enabling predictive simulations of engineering designs with quantified margins and uncertainties for model-based flight qualification of complete spacecraft. A critical part of this process is the accurate mode ...STTR Phase I 2010 National Aeronautics and Space Administration
SBC: AMERICAN GNC CORPORATION Topic: T1
In providing an innovative solution to improving information technologies and health management systems, AGNC is proposing a significant technological achievement with the Advanced Structural Health Monitoring System for Comprehensive Real-Time Vehicle Characterization. During in-flight conditions, this system is able to not only provide the status of information such as regarding the flight envel ...STTR Phase I 2010 National Aeronautics and Space Administration
SBC: BALCONES TECHNOLOGIES LLC Topic: T6
During our Phase I STTR effort, Balcones Technologies, LLC and The University of Texas Center for Electromechanics (CEM) successfully achieved all Phase I objectives and developed a concept design for an active Vibration Isolation System (VIS) that fully meets all requirements defined or implied in STTR 2007-1 Subtopic T6.02. Now the Balcones Technologies - CEM team proposes to develop, test, and ...STTR Phase II 2010 National Aeronautics and Space Administration
SBC: Ekso Bionics Inc Topic: EO
This Small Business Technology Transfer (STTR) Phase II project proposes the development of an integrated powered knee-ankle prosthesis. The objective of this proposal is to investigate the use of integrated powered knee and ankle joints in trans-femoral prostheses that use sensory information from the ground and the wearer. The hypothesis is that a prosthesis with actively powered knee and ankle ...STTR Phase II 2010 National Science Foundation
SBC: DBC Technology Corp. Topic: ARMY09T020
The Phase I effort was successful in experimentally showing feasibility of a combined isotope transmitter that can be developed and demonstrated under the Phase II program. The initial experimental results give the window of gas mixtures for a stable discharge. Laser extraction tests were accomplished with C12/C13 mixtures to give guidance for further work to increase laser gain. For application ...STTR Phase II 2010 Department of DefenseArmy
SBC: DBC Technology Corp. Topic: ARMY08T024
Results of the Phase I work showed that an advanced, compact Point Sensor can be built with good sensitivity for detection of both biological agents and chemical aerosol and vapor agents. This will be the first point sensor capable of this dual role. TheSTTR Phase II 2010 Department of DefenseArmy
SBC: Eon Corp. Topic: ARMY08T006
Defects of mitochondrial performance limit physical and cognitive endurance, and resistance to age-related deterioration and trauma. However large scale screens to identify drug-like compounds that improve mitochondrial function have not taken place, becSTTR Phase II 2010 Department of DefenseArmy
SBC: Frontier Technology Inc. Topic: OSD08T003
As the U.S. Government increases participation in post-conflict Stabilization and Reconstruction Operations (SARO) around the globe, the ability to understand the relationships between task completion and mission completion is critical. The US Government employs a metrics tool developed though the Monitoring Progress in Conflict Environments project. The objective of this Phase II STTR is to provi ...STTR Phase II 2010 Department of DefenseArmy
SBC: Imaging Systems Technology, Inc. Topic: EL
This Small Business Technology Transfer (STTR) Phase II project is a study to expand the high speed addressing work conducted under Phase I using monochrome Plasma-spheres to color Plasma-spheres. Plasma-spheres are hollow transparent shells that encapsulate a selected pressurized gas. When a voltage is applied across the shell, the gas ionizes and glows. Plasma-spheres are applied to flexible, el ...STTR Phase II 2010 National Science Foundation
STTR Phase I: New Manufacturing Techniques to Produce High Quality Thin Films of Inherently Conducting Polymer Nanofibers Over a Large AreaSBC: Fibron Inc. Topic: MM
This Small Business Technology Transfer (STTR) Phase I project aims to develop a manufacturing process that can coat a variety of substrates with uniform thin films of inherently conducting polymer (ICP) nanofibers over a large area. Traditionally, these nanostructured organic materials are difficult to process into thin films covering a large area, which has limited the commercial applicability ...STTR Phase I 2010 National Science Foundation