You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: Wattminder Topic: 07c
Despite significant advancement in PV technology and efficiency, qualification testing and market penetration, actual performance in the field of operation under a myriad of environemental constraints remains an important topic. PV arrays are subject to degradation mechanisms that can significantly impact power production capability. For revenue-critical PV arrays, detection of underperformance an ...STTR Phase II 2010 Department of Energy
SBC: SHAKTI TECHNOLOGIES, INC. Topic: 09b
We need transformational manufacturing technologies for fabrication of nanomaterials for manufacturing batteries and capacitors that will have a huge impact on improving the energy and power density of batteries and capacitors for transportation, energy storage and consumer electronics applications. Development of novel nanomaterials with high energy and power capability and a novel, nontraditiona ...STTR Phase II 2010 Department of Energy
Recovery Act- Development of a Fiber Based Source of High Average Power Ultrafast Pulses at 2.0 MicronsSBC: Kapteyn-Murnane Laboratories, Inc. Topic: 04d
Bright coherent light sources in the soft x-ray region of the spectrum are useful for a variety of applications of interest to DOE in the basic sciences, nanoscience and biology, and for technological applications. At Free-Electron Laser Facilities, peak power output of the x-ray pulses is enhanced by using a mid-infrared laser pulse instead of a near-infrared pulse. The current front end for mid- ...STTR Phase II 2010 Department of Energy
SBC: Omega-P, Inc. Topic: 39a
Development of accelerator structures that can sustain acceleration gradients up to 150 MeV/m are required in order to build a future multi-TeV collider with an energy reach beyond present or planned electron-positron colliders. Limitations for operation with high acceleration gradient arise from RF breakdown. High-melting-point insulated coatings are to be applied first to test samples and to p ...STTR Phase II 2010 Department of Energy
SBC: OPTO-KNOWLEDGE SYSTEMS INC Topic: 58b
Spectroscopy in the long-wave infrared (LWIR) wavelength region (8 to 12STTR Phase II 2010 Department of Energy
SBC: SOLARNO INC Topic: 08d
The demands of the solar energy market require the development of advanced photovoltaic technologies. The DOE is seeking to develop organic PV technologies that are more efficient, long lasting and cost competitive to traditional ones. Organic PV (OPVs) have become well recognizedas an important candidate for future solar power products, although their efficiency is not exceeding 6-7%. The overal ...STTR Phase II 2010 Department of Energy
SBC: INNOSENSE CORPORATION Topic: 13c
Although carbon capture and storage (CCS) technology has received the most attention for its potential to reduce emissions, processes that convert CO2 into a useful product can provide a positive return on investment and not just be an unrecoverable cost. Compared to CCS technology, the potential revenue generated by the use of CO2-based product is likely to grow popular with time while reducing ...STTR Phase II 2010 Department of Energy
SBC: Radiabeam Technologies, LLC Topic: 34a
Current state-of-the-art SRF accelerating cavities require the use of many complex and expensive techniques throughout their fabrication/performance cycle. This project will utilize a novel Additive Manufacturing (AM) process to produce nearly monolithic SRF niobium cavities of arbitrary shape with features such as optimized wall thickness and/or integrated stiffeners, greatly reducing the cost a ...STTR Phase II 2013 Department of Energy
SBC: Radiabeam Technologies, LLC Topic: 26a
Laser based advanced accelerators can achieve very high accelerating gradients, but their duty cycle is limited by the laser power availability and media recovery time. Inverse Free Electron Laser (IFEL) is a vacuum farfield laser accelerator scheme which does not rely on a medium (plasma) or a structure (metal or electric) and therefore is potentially capable of accelerating charged particles ver ...STTR Phase II 2016 Department of Energy
SBC: Radiabeam Technologies, LLC Topic: 07a
Transmission electron microscopy (TEM) is one of the primary tools for biological and materials characterization and has many important research applications. There is an overarching need to improve the temporal resolution of TEMs. State-‐of-‐the-‐art single shot TEM only achieve 10 nanoseconds temporal resolution. Technical Approach UCLA and RadiaBeam Tec ...STTR Phase II 2016 Department of Energy