You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. AC Plasma Sensor For High Enthalpy Hypersonic Test Facilities

    SBC: SPECTRAL ENERGIES LLC            Topic: AF17AT002

    Spectral Energies and the University of Notre Dame is developing a new class of point-wise sensors for high-enthalpy conditions that rely on the use of a weakly ionized AC discharge between two electrodes as the main sensing element. The advantages of this approach include a native high bandwidth with a theoretical maximum in excess of 15 MHz and a simple mechanical design that is inherently robus ...

    STTR Phase I 2017 Department of DefenseAir Force
  2. Active Control of a Scramjet Engine

    SBC: AHMIC AEROSPACE LLC            Topic: AF15AT19

    Scramjet engines are designed to operate across a wide Mach number range and typically incorporate isolator sections to provide sufficient back-pressure margin and prevent unstart. As military requirements become increasingly demanding, an active, closed-loop control system is necessary to maintain engine stability and power output. During Phase I, key components of a scramjet control system were ...

    STTR Phase II 2016 Department of DefenseAir Force
  3. Adaptive Integrated Multi-Modal Sensing Array

    SBC: POLARIS SENSOR TECHNOLOGIES INC            Topic: AF08BT02

    Nanoscale infrared detectors are emerging as a potentially powerful alternative to traditional infrared detector technologies. The University of New Mexico has developed dots in a double well (DDWELL) quantum dot infrared photodetectors which have a spectral responsivity that can be tuned by controlling the bias voltage applied. In this Phase II effort, Polaris Sensor and UNM would fabricate a g ...

    STTR Phase II 2010 Department of DefenseAir Force
  4. Adaptive Materials for SHM

    SBC: AURA TECHNOLOGIES, LLC            Topic: AF17AT018

    Bennett Advanced Research proposes to examine fundamental properties of adaptive materials for use with Additive Manufacturing technologies. The focus will be on developing a system for spacecraft Self Health Monitoring (SHM).

    STTR Phase I 2017 Department of DefenseAir Force
  5. Additive Manufacturing Plastic Materials with Improved Dielectric Breakdown Strength

    SBC: VOXTEL, INC.            Topic: AF15AT07

    In this Phase II program, Voxtel will design, manufacture, and benchmark-test additive-manufactured (AM) insulators capable of electrical stress greater than 25 kV/mm, for use in high-electric-field applications, such as high-power microwave (HPM) devices. These insulators will sustain vacuum of 10-7 Torr and withstand 20 psi of pressure. To achieve this goal, Voxtel will synthesize readily additi ...

    STTR Phase II 2017 Department of DefenseAir Force
  6. Advanced Mediator Architectures for Efficient Electron Transfer in Enzymatic Fuel Cell Electrodes

    SBC: CFD RESEARCH CORPORATION            Topic: AF09BT03

    Our objective is to develop advanced mediator architectures for efficient electron transfer in enzymatic fuel cells (EFCs) for low power systems. The proposed EFC will leverage ongoing research at both CFDRC and Michigan State University to provide a fully-integrated lightweight, low-cost, manufacturable, and renewable power supply, for various military and civilian applications. EFC systems offer ...

    STTR Phase I 2010 Department of DefenseAir Force
  7. Advanced Morphing Moulage for Medical Training (AMM-MT)

    SBC: VCOM3D INC            Topic: DHA17A002

    For this Phase I SBIR proposal, Vcom3D proposes to design advanced medical moulage that accurately simulates the progression of an injury or pathology by morphing through a series of clinical states to enable learners to confirm the progression of the wound and to determine whether iatrogenic errors or pathologies occurred duing treatment. The physical morphing moulage may be applied to medical m ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
  8. Affordable Integrated Circuit Packaging and Assembly for High-Temperature Intelligent Components

    SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION            Topic: AF16AT17

    Micro-RDC proposes to demonstrate the feasibility of developing low-cost, low-weight, reliable packaging materials and processes to produce low-power advanced Integrated Circuits (ICs) that can operate continuously at temperatures between -55C and +225...

    STTR Phase I 2016 Department of DefenseAir Force
  9. A High Performance and Cost Effective Ultra High Performance Concrete

    SBC: i2C Solutions, LLC            Topic: AF12BT04

    ABSTRACT: Adversarial installations, such as those housing the means for nuclear weapons production, are increasingly being constructed in heavily fortified locations and often using ultra high performance concrete (UHPC) as the construction material. As such, the U.S. Air Force has considerable interest in further developments of ultra high performance concrete (UHPC) to maintain an advantage o ...

    STTR Phase I 2013 Department of DefenseAir Force
  10. A LevelSet / XFEM Approach for Topology Optimization of Thermally Loaded Structures

    SBC: Lateral Unbounded Software LLC            Topic: AF17AT015

    The automotive and aerospace industries use topology optimization to minimize structural weight while satisfying functional constraints. However, the industry-standard fictitious material or density approach has been less effective when applied to physics beyond simple structural mechanics. Known issues include: failed numerical convergence or so-called gray material in computed optimal designs, n ...

    STTR Phase I 2017 Department of DefenseAir Force
US Flag An Official Website of the United States Government