You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: CFD RESEARCH CORPORATION Topic: MDA09T005
Higher efficiency solar cells are needed to reduce mass, volume, and cost of DoD space missions. However, to achieve higher efficiency and radiation hardness of the best to date multi-junction photovoltaic (PV) devices, several challenges must be addressed. This project aims to develop: 1) Quantum Well (QW)-based multi-junction cell that exhibits enhanced efficiency, and 2) Radiation-hardened PV c ...STTR Phase I 2010 Department of DefenseMissile Defense Agency
SBC: Plasma Processes, LLC Topic: MDA09T002
Hypersonic missile defense systems are being designed to reach global threats. During flight, external surfaces are predicted to reach temperatures in excess of 2200C. As a result, innovative, high performance thermal protection systems (TPS) are of great demand. Among ultra-high temperature ceramics (UHTC), it is well known that ZrB2- and HfB2-based materials have high melting temperatures and ...STTR Phase I 2010 Department of DefenseMissile Defense Agency
Development for Radiation Hardened Applications of Advanced Electronics Materials, Processes, and DevicesSBC: RNET TECHNOLOGIES INC Topic: MDA09T006
The Missile Defense Agency (MDA) seeks technical investigations related to the development and application of advanced electronic materials, processes, and devices to meet its need for radiation hardened, high performance electronics for critical space and missile applications. With the advent of smaller transistor dimensions and reductions in price per bit, significant changes in materials and pr ...STTR Phase I 2010 Department of DefenseMissile Defense Agency
SBC: Sinmat Inc Topic: MDA09T001
Gallium Nitride (GaN) substrates are ideal materials for fabrication of high-power and high-frequency devices based on III-V materials. The current state-of-the-art Chemical Mechanical Polishing (CMP) methods are plagued by several challenges, including, surface charge affects due to surface contamination, and sub-surface damages, which can limit the quality of III-V devices. Furthermore, there is ...STTR Phase I 2010 Department of DefenseMissile Defense Agency
SBC: UES INC Topic: MDA09T002
This Phase I STTR program seeks a new fabrication method to produce stronger (>100 kpsi) and tougher (>10 MPa m1/2) ultra high temperature Ta-Hf-C-based composites (UHTC) with an outstanding oxidation resistance for use as thermal protection systems for hypersonic applications, as well as for advanced rocket nozzle throat components. UES will apply a novel "Top Down" approach to control the micro ...STTR Phase I 2010 Department of DefenseMissile Defense Agency
SBC: DGNSS Solutions, LLC Topic: MDA09T003
The primary objective of the proposed research is to develop proof of concept of a software programmable X-Band radar system using low cost antenna array technology with digital beamforming architecture based on multiple receiver channels. The performance objectives will aim at a minimum of 400 MHz instantaneous bandwidth and a minimum instantaneous dynamic range of 52 dB. The objective of the t ...STTR Phase I 2010 Department of DefenseMissile Defense Agency
SBC: Sinmat Inc Topic: MDA12T003
Antimony containing III-V semiconducting compounds are particularly attractive for the fabrication of a wide variety of electronic and optoelectronic devices such as photo detectors operating in the long wave infrared wavelength (12-32µm) range. The production of epi quality GaSb wafers still remains one of the important problems for rapid commercialization of GaSb devices. Sinmat Inc. proposes a ...STTR Phase I 2013 Department of DefenseMissile Defense Agency
SBC: DECIBEL RESEARCH, INC. Topic: MDA12T002
The development and integration of three unique and innovative algorithm prototypes into a"Fused Track and Characterization Schema"are proposed. This Schema will encompass the determination of signatures and characteristics of objects that can be identified by RF and EO/IR Sensors in order to enable multi-sensor data fusion and correlation. The first algorithm, the"3D Pose Estimation"Algorithm, p ...STTR Phase I 2013 Department of DefenseMissile Defense Agency
Test Article Printing with Laser Additive Manufacturing (TAP-LAM) for Threat Surrogate Target ProductionSBC: MV Innovative Technologies LLC (DBA: Opt Topic: MDA17T001
Optonicus proposes development of the TAP-LAM (Test Article Printing with Laser Additive Manufacturing for Threat Surrogate Target Production) powder bed fusion and directed energy depositions systems. The TAP-LAM metal additive manufacturing system will advance strategic missile defense system testing capabilities by improving 3D printing methods to rapidly produce large-scale threat surrogate ta ...STTR Phase I 2018 Department of DefenseMissile Defense Agency
SBC: MRL MATERIALS RESOURCES LLC Topic: MDA17T001
Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...STTR Phase I 2018 Department of DefenseMissile Defense Agency