You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. SERA Tester Application for Process Control

    SBC: Colonial Circuits, Inc.            Topic: N/A

    This effort would develop the laboratory set-up of the solderability tester into a real time statistical process control tool in the manufacture of printed wiring boards. By correlation of SERA test data to copper contamination levels in the solder plating bath; and the application of statistical process control techniques, real time feedback to the plating process would be established.

    SBIR Phase I 1993 Department of DefenseArmy
  2. Omni-Directional MIcrostrip Antenna on a Soldier's Helmet

    SBC: Mahanad Communications, Inc.            Topic: N/A

    Omni-directional microstrip antenna system integrally located on a soldier's helmet for secure and reliable communications in the battlefield is the subject matter of this proposed innovative research. The antenna system consist of (N+1) circular microstrip patch elements integrally located on the soldier's helmet to provide omni-directional coverage with acceptable antenna gain for all positions ...

    SBIR Phase I 1996 Department of DefenseArmy
  3. Low Intensity Conflict Aerosol Munition

    SBC: DCS CORP.            Topic: N/A

    Aerosol sprays of paint, epoxy, and other substances can be dispensed by mines and other munitions to disable hostile sensors, vehicles, and weapon systesm. For example, a paint-filled aerosol mine could be designed to detect an approaching vehicle, pop into the air, and eject and aerosol mist of opaque, brightly colored, slovent resistive, electrically conductive paint at the vehicle. The resulti ...

    SBIR Phase I 1993 Department of DefenseArmy
  4. Synthesis of Nanocrystalline Tungsten Powder



    SBIR Phase I 1993 Department of DefenseArmy
  5. A CAD-NDE Translator (CADNET) for the Ultrasonic Inspection of Contoured Ceramic Gas Turbine Components

    SBC: KARTA TECHNOLOGIES            Topic: N/A

    The automated inspection of gas turbine components has proven to be difficult due to their complex geometry. While ultrasonics has demomstrated excellent capabilities in detecting and characterizing the erosion and corrosion on turbine components from the hot effluent gases, it's application details laborious alignment procedures for the ultrasonic transducer during inspection. The need for automa ...

    SBIR Phase I 1993 Department of DefenseArmy
  6. Bistatic Chaff and Weather Modeling

    SBC: Decision-science            Topic: N/A

    It is proposed to develop a mathematical model for the bistatic signature of chaff, as well as weather (rain and fog). The model will include the full scattering matrix and temporal and spatial amplitude and phase fluctuation statistics. The model will be parametric in such factors as the electrical length of the chaff dipoles, wind turbulence, and radar resolution volumes. DSA proposes to build u ...

    SBIR Phase I 1993 Department of DefenseArmy
  7. Solder Plating Process Control

    SBC: P C Dynamics            Topic: N/A

    The objective of this proposal is to develop and implement a scientifically based solderability tester as a process control tool during the fabrication process for printed circuit boards. Using the sequential electrochemical reduction analysis (SERA) process as invented by Rockwell International, data will be gathered to correlate the coulomb density values determined by SERA to current, commercia ...

    SBIR Phase I 1993 Department of DefenseArmy
  8. Low Cost, LPI, All Weather, Automated Optical Microwave Technology for IFF of Unmanned Aerial Vechicles (UAV)

    SBC: Focused Energy Technologies            Topic: N/A


    SBIR Phase I 1993 Department of DefenseArmy
  9. An Extended Ada Runtime Environment for Distributed, Fault Tolerant Applications

    SBC: Sbs Engineering, Inc.            Topic: N/A

    In response to ever-increasing requirements, next-generation embedded systems will typically consist of several physically dispersed uniprocessor or multiprocessor nodes. In order to harness the potential of such architectures, a definition of distributed, fault-tolerant Ada must exist. Because the language standard does not meaningfully address distribution or fault tolerance, an extension of the ...

    SBIR Phase I 1993 Department of DefenseArmy
  10. Convolving Optically Addressed VLSI Liquid Crystal Spatial Light Modulator

    SBC: Optoelectronic Data System            Topic: N/A

    The principle objective of the proposed research program is the development of a noval spatial light modulator that calculates a 3 x 3 kernel convolution on an input image. The spatial light modulator consists of a ferroelectric liquid crystal modulator on top of a CMOS VLSI chip. During Phase I, a comprehensive study of several convolving SLM designs will be performed. The study will examine circ ...

    SBIR Phase I 1993 Department of DefenseArmy
US Flag An Official Website of the United States Government