You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Expert Polynomial Network Turbine Engine Diagnostician

    SBC: ABTECH CORPORATION            Topic: N/A

    The objective of this effort is to demonstrate a prototype advanced diagnostic system for the T800 turboshaft engine using a hybrid polynomial network and production-rule expert system. The resulting system will demonstrate the feasibility of developing a revolutionary diagnostic capability which can model the engine at a system level, detect failures before they become signficant isolate faults, ...

    SBIR Phase I 1993 Department of DefenseArmy
  2. Autonomous, Hand-Held Satellite Location and Pointing System (SLAPS)

    SBC: Adroit Systems, Inc.            Topic: N/A

    Adroit Systems, Inc. proposes to develop a hand-held , autonomous Satellite Location and Point System (SLAPS). The system will store communication satellites' ephemeris data to calculate and display visibility windows. SLAPS also will use this data to calculate the azimuth and elevation angle to the communication satellite of interest. The system will use interferometry of Global Positioning Syste ...

    SBIR Phase I 1993 Department of DefenseArmy
  3. Icon-Based Intelligent Tutoring System Utilizing Fuzzy Expert Systems and Multi-Media Gaming Simulations

    SBC: American Research Corporation of Virginia            Topic: N/A

    See Charles River Analytic comment. It applies here also.

    SBIR Phase I 1993 Department of DefenseArmy
  4. Digital Speckle Imaging for In Situ Monitoring and Characterization of Laser-processed Refractory Coatings

    SBC: American Research Corporation of Virginia            Topic: N/A

    The use of high-temperature laser densification/annealing techniques for enhancing materials surface characteristics has opened new opportunities in material/laser-process diagnostic instrumentation. Important issues in fabrication of reproducible refractory ceramic coating film lies in understanding of the interrelationship between processing parameters and surface properties. To respond to this ...

    SBIR Phase I 1993 Department of DefenseArmy

    SBC: Atkinson-noland Assoc. Inc.            Topic: N/A


    SBIR Phase I 1993 Nuclear Regulatory Commission
  6. Ionospheric Propagation Predictions Using Satellite Beacon

    SBC: CENTER FOR REMOTE SENSING, INC.            Topic: N/A

    This receiver sets forth a plan to utilize commercial GPS receivers for real time ionospheric prediction at a remote location. The project will demonstrate the feasibility of using TEC measurements and evaluate the accuracy and applicability of these measurements for improvements in HF propagation. For this we assess the predictability of the slab thickness parameter T towards solar and geophysica ...

    SBIR Phase I 1993 Department of DefenseArmy
  7. SERA Tester Application for Process Control

    SBC: Colonial Circuits, Inc.            Topic: N/A

    This effort would develop the laboratory set-up of the solderability tester into a real time statistical process control tool in the manufacture of printed wiring boards. By correlation of SERA test data to copper contamination levels in the solder plating bath; and the application of statistical process control techniques, real time feedback to the plating process would be established.

    SBIR Phase I 1993 Department of DefenseArmy
  8. Fabrication of High Temperature Metal Matrix Composite Tubes by Vapor Deposition Methods

    SBC: CORDEC CORP.            Topic: N/A

    Advanced turbine engines and flight vehicles will depend upon new, high-temperature metal matrix composites (MMC's) to meet performance goals. Engineering characterization of such materials is difficult and costly, which accounts for the meager property database available to designers. Thin-walled tubes would be especially useful for developing constitutive relations and failure criteria under mul ...

    SBIR Phase I 1993 Department of DefenseArmy
  9. Helmet-Mounted Display Flight Symbology and Stabilization Concepts

    SBC: Crew Systems Consultants            Topic: N/A


    SBIR Phase I 1993 Department of DefenseArmy
  10. Low Intensity Conflict Aerosol Munition

    SBC: DCS CORP.            Topic: N/A

    Aerosol sprays of paint, epoxy, and other substances can be dispensed by mines and other munitions to disable hostile sensors, vehicles, and weapon systesm. For example, a paint-filled aerosol mine could be designed to detect an approaching vehicle, pop into the air, and eject and aerosol mist of opaque, brightly colored, slovent resistive, electrically conductive paint at the vehicle. The resulti ...

    SBIR Phase I 1993 Department of DefenseArmy
US Flag An Official Website of the United States Government