Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Titanium-Composite Body Armor Plates

    SBC: Advanced Protection Products,            Topic: N/A

    Advanced Protection Products, Inc. (APPI) will use advanced materials and processes to develop and certify Very Light Body Armor (VLBA) plates that are capable of defeating a variety of ballistic threats. The VLBA plates will be designed using a titanium allow based metallic-composite armor system to provide cost-effective, lightweight protection. Composite facing and backing materials will be u ...

    SBIR Phase I 1998 Department of DefenseSpecial Operations Command
  2. Dynamic Firing Zone Imaging System

    SBC: Conceptual Systems & Software Inc            Topic: N/A

    An automated dynamic firing zone generation imaging system is needed to increase the effectiveness and utility of shipboard weapon systems. The current manual firing zone definition process is manpower intensive, complex, and cannot account for motion or changing topside configuration. These limitations greatly restrict the lethality and utility of shipboard weapons. This project proposes a dyna ...

    SBIR Phase I 1998 Department of DefenseNavy
  3. Unified HP/RT Development to Deployment Middleware Platform

    SBC: Conceptual Systems & Software Inc            Topic: N/A

    A significant problem for modern combat control system implementations is the incompatible development and deployment environments. These applications have specific performance requirements that until recently were only accurately obtained on the target installation system. However, for various logistic and economic reasons, the platforms utilized for advanced applications have typically been inc ...

    SBIR Phase I 1998 Department of DefenseNavy
  4. Self-Assembled Monolayer Based Methods for Fabrication of Diffractive Optical Elements

    SBC: DIGITAL OPTICS CORP.            Topic: N/A

    This SBIR Phase I project builds upon Digital Optics Corporation's experience in the design, fabrication and commercialization of diffractive and micro-optics and the experience of Dr. George Whitesides of Harvard University to provide an innovative approach to the fabrication of diffractive and micro-optical components using self-assembled monolayers (SAM's). The proposed approach makes use of SA ...

    SBIR Phase I 1998 Department of DefenseNavy
  5. Suprises and Opportunities


    Emergent Technologies Corp. (ETC) in conjunction with research partners at West Virginia University has developed and recently patented an innovation antenna that promises to revolutionize the science of antenna design, construction and utilization. The antenna, labeled the Countrawound Toroidal Helical Antenna (CTTHA), offers a number of significant advantages over conventional antennas. The CT ...

    SBIR Phase I 1998 Department of DefenseSpecial Operations Command
  6. TERFENOL-D Lamination Process Cost Reduction

    SBC: Etrema Products, Inc.            Topic: N/A

    All high performance TERFENOL-D sonar devices require the drivers to be laminated for eddy current control. The process of laminating TERFENOL-D to present interlamina resistivity requirements results in low yields due to considerable material loss and is, therefore, a wasteful process. The objective of this program is to define and experimentally verify accurate interlamina resistivity levels f ...

    SBIR Phase I 1998 Department of DefenseNavy
  7. Virtual Vertical Aircraft Signal Trainer

    SBC: FATS, INC.            Topic: N/A

    AeroMed Software, L.L.C., proposes to develop an interactive virtual environment simulator for vertical aircraft signal training. The proposed system is intended to provide Landing Signal Enlisted (LSE) trainees with a dynamic training device similar to the operational flight trainers used by aviators. Recent advances in data acquisition, signal processing and graphics software, computer process ...

    SBIR Phase II 1998 Department of DefenseNavy
  8. Raman Image Amplifier for Marine LIDAR Applications

    SBC: LITE CYCLES, INC.            Topic: N/A

    This project will focus on the development of a compact, rugged, low-maintenance, cost-effective, all solid-state Marine Raman Image Amplifier (MARIA) capable of amplifying low-level ocean LIDAR images and producing gated images with potential gate times of tens of picoseconds. The innovative technology to be implemented is based on a solid-state stimulated Raman scattering technique developed by ...

    SBIR Phase I 1998 Department of DefenseNavy
  9. A Novel Processing Technique for the Large-Scale Production of Red Phosphorus

    SBC: ATS-MER, LLC            Topic: N/A

    Current techniques for the production of red phosphorus powders cannot produce 5¿m size powders while maintaining a pure surface. Two new processing techniques are suggested that are capable of processing red phosphorus into powders 5¿m or smaller in size. These techniques have been demonstrated with conventional metals and alloys but not with phosphorus. One important advantage of these proc ...

    SBIR Phase I 1998 Department of DefenseNavy
  10. Low-Cost Hot-Gas-Turbine Powered Hydraulic Power Supply

    SBC: M-DOT Aerospace            Topic: N/A

    M-DOT Inc. proposes to conduct a trade study and design a low- cost hot-gas turbine driven fuel pump/hydraulic power supply for use on an advanced missile system. When design is complete, a cost analysis of a proposed production version will be conducted. The unit will be capable of the following: Delivering 0.5 lbm/sec of jet fuel against a back pressure of 100 psia and providing 1 hp of hydraul ...

    SBIR Phase II 1998 Department of DefenseNavy
US Flag An Official Website of the United States Government