You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Acoustic Interference Rejection

    SBC: Advanced Acoustic Concepts, Inc.            Topic: N/A

    "Under Phase I array-processing techniques were developed andanalyzed which provided an effective interference rejectioncapability for acoustic intercept systems. This was demonstratedvia computer analysis and simulation of these techniques asapplied to a volumetric acoustic intercept sensor. It was shownthat, using such an array, an adaptive spatial normalizationtechnique could be used to suppr ...

    SBIR Phase II 2002 Department of DefenseNavy
  2. Compressed Internet Protocol (IP) Data Via Geosynchronous Earth Orbit (GEO) Satellite Circuits

    SBC: Critical Technologies Inc            Topic: N/A

    "Refine the characteristics of, and integrate a softwareimplementation of, an optimal protocol suite for reliable IP WANtransport over GEO satellites. The prototype Application TrafficController (ATC), integrating a caching controller, compressioncontroller, and prioritization and queuing controller, with anautomatic transport selector and enhanced transport protocols,will enable reliable multica ...

    SBIR Phase II 2002 Department of DefenseNavy
  3. Optimizing Prognostic and Health Management System Designs for the Joint Strike Fighter

    SBC: Impact Technologies            Topic: N/A

    "The proposed program is focused specifically on developing and optimizing advanced Prognostics and Health Management (PHM) system designs for various Joint Strike Fighter aircraft systems and subsystems. A PHM design optimization tool developed under aseparate program will be utilized to examine several selected JSF aircraft areas including the propulsion system (Fan/Compressor/Turbine, Engine ...

    SBIR Phase II 2002 Department of DefenseNavy
  4. High Temperature Multifunctional Applique

    SBC: INTEGUMENT TECHNOLOGIES, INC.            Topic: N/A

    "The development of applique technology as an alternative to current paint coating systems is important to all aircraft manufacturers and end users, especially th eend users in the military. This is due to the tremendous savings that may be realized viathe elimination of hazardous solvents, materials and by-products currently required for application, maintenance, removal, and repair of current p ...

    SBIR Phase II 2002 Department of DefenseNavy
  5. Reflex Triode

    SBC: KTECH CORP.            Topic: N/A

    "Reflex triode bremsstrahlung sources potentially provide warm X-ray sources (20 keV to 500 keV), capable of generating high doses (~10 cal/g gold) over exposure areas of ~20 cm2. This needed capability allows experimental verification of warm X-ray inducedthermomechanical response, SGEMP, and box IEMP models for achieving component and system certification to hostile environments.In a reflex trio ...

    SBIR Phase II 2002 Department of DefenseDefense Threat Reduction Agency
  6. Digital Data Download (D3) with Crash Survivable Memory

    SBC: MANAGEMENT SCIENCES INC            Topic: N/A

    "Our Phase I SBIR project performed innovative research to addressthis problem. This research investigated the feasibility ofdeveloping a multi-purpose, crash survivable, universal flightinformation system and data recorder (UFDR). The UFDR willdigitally process and record structural, engine/propulsion,electrical/avionics, environmental, exceedance, and event data tocrash survivable memory with c ...

    SBIR Phase II 2002 Department of DefenseNavy
  7. Advanced Ceramic Gun Barrel Materials & Processing Methods--Phase II

    SBC: Thor Technologies, Inc.            Topic: N/A

    "Barrel erosion, which is produced by the combination of hightemperature and pressure with aggressive propellant combustionproducts, and the action of the projectile, results in decreasedmuzzle velocities, increased projectile yaw, and decreasedaccuracy. New material designs are needed to mitigate erosion ingun barrels, which limits service lifeCeramic composites are a leading material candidate ...

    SBIR Phase II 2002 Department of DefenseNavy
  8. Enhanced Resistance to Mine Detonation

    SBC: Thornton Tomasetti, Inc.            Topic: N/A

    The objective of this proposed research is to demonstrate thatbubble screens of the type produced by ship maskers may enhanceresistance to mine detonation. Ship masker systems are acousticcountermeasures that utilize air bubbles to mask potentialtargets. Masker systems work by reducing radiated noise from asurface ship by injecting air bubbles into water adjacent to thewet surface of a ship. The ...

    SBIR Phase II 2002 Department of DefenseNavy
  9. Advanced Fluid Modeling Capability for Underwater Shock Analysis of Naval Ships

    SBC: Thornton Tomasetti, Inc.            Topic: N/A

    An existing 3D Eulerian code for computing incompressible flows will be enhanced to enable underwater explosion simulations, focusing especially on free-field bulk cavitation, bubble growth and collapse, and bubble jetting. The emphasis will be onimproving the accuracy and efficiency of the code's algorithms for simulating underwater shock. Currently the code includes level set methods, adaptive m ...

    STTR Phase II 2002 Department of DefenseNavy
  10. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase II 1998 Department of DefenseNavy
US Flag An Official Website of the United States Government