You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Bifunctional Regenerative Electrochemical Air Transformation for Human Environments

    SBC: SKYRE, INC            Topic: T6

    The proposed Bifunctional Regenerative Electrochemical Air Transformation for Human Environments (BREATHE) for life support and habitation is part of the atmosphere revitalization equipment necessary to provide and maintain a livable environment within the pressurized cabin of crewed spacecraft. Sustainable Innovations (SI) has developed a novel solid state technology for gas compression based on ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. Model-Based Design Assessment and FM Visualization Technologies in TEAMS

    SBC: QUALTECH SYSTEMS, INC.            Topic: S5

    NASA's FM community has identified one of the major problems with FM on the Science Mission Directorate (SMD) missions being that the complexity of FM has often been discovered late in the system development during testing, or in other cases in flight itself requiring unplanned, major spikes in resources to ensure that it will work properly and not create failures in the system that it is tryi ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  3. Hyperspectral Microwave Photonic Radiometer

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: S1

    Passive Microwave Remote Sensing is currently utilized by NASA, NOAA, and others to conduct Earth Science missions, including weather forecasting, early warning systems, and climate studies. These sensors could also be used in upcoming missions such as Saturn’s moon to study atmospheric makeup. On earth, humidity and temperature sounding is conducted near several absorption lines to determine k ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  4. Internal/External Surface Finishing of Additively Manufactured IN-625 Components

    SBC: REM CHEMICALS INC            Topic: Z3

    The objective of this proposal is to develop a surface finishing technology for Inconel 625 Additive Manufactured (AM) workpieces. The following methodologies will be evaluated and optimized: vibratory finishing, chemical milling and electropolishing. Once optimized, the project will explore combinations of these aforementioned methodologies in order to identify a surface finishing process that ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. Textile Strain Measurement System

    SBC: KATABASIS AEROSPACE, LLC            Topic: Z11

    Current evaluations of stress in textile parachute structures rely heavily on analytical estimation without adequate data collection means to validate or improve simulations. Features of available data acquisition tools are too limited to facilitate “live” stress measurement of parachute textiles in operation. Advancements in microelectronics and electronics infused "E-textiles" can be emplo ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. Radiation-Hardened CubeSat Power Management & Distribution (PMAD) for Europa Environment

    SBC: RAGNAROK INDUSTRIES INC            Topic: S4

    In Phase 1, Ragnarok will mature the much-needed rad-hard BCDR technology from TRL 3 - 4. Phase 2 of Ragnarok’s efforts will proceed to develop the entire functional prototype radiation-hardened PMAD system including the newly developed BCDR hardware from Phase 1. Phase 2 efforts will conclude with a full Critical Design Review (CDR) and a completed and closed list of HRs and HRMPs. The final pr ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. Innovative, Rapidly Regenerable, Structured Trace-Contaminant Sorbents Fabricated Using 3D Printing

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: H4

    The NASA objective of expanding the human experience into the far reaches of space requires regenerable life support systems. This proposal addresses the fabrication of structured (monolithic), carbon-based trace-contaminant (TC) sorbents for the space suit used in Extravehicular Activities (EVAs). The proposed innovations are: (1) the use of thin-walled, structured carbon TC sorbents fabricated u ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: FRAMERGY INC            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  9. The Vulcan Advanced Hybrid Manufacturing System

    SBC: Made In Space, Inc.            Topic: H7

    Building on previously funded work by NASA and DARPA, its internal research and development projects, and manufacturing activities occurring on the International Space Station (ISS), Made In Space, Inc. (MIS) is developing the VULCAN system to address NASA’s requirement to produce high-strength, high-precision polymer and metallic components on-orbit with comparable quality to commercially-avail ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  10. Industrial Crystallization Facility for Nonlinear Optical Materials

    SBC: Made In Space, Inc.            Topic: H8

    Made In Space, Inc. (MIS) proposes the development, to a critical design level, of an Industrial Crystal Facility (ICF) for microgravity product manufacturing and applied research. The ICF is focused on advanced materials engineering, rather than biomedical research, and expands utilization of the ISS into new product areas not previously investigated. Intended applications include nonlinear optic ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government