You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Compact Swaging Machine for Aircraft Carrier Purchase Cable Terminals

    SBC: CREARE LLC            Topic: N06T023

    For the U.S. Navy, Creare is developing a Compact Swaging Machine (CSM) to attach arresting gear Purchase Cable terminals on ship. Our CSM utilizes three innovative features to dramatically reduce the size and weight of the swaging machine to make it usable in a shipboard environment: (1) a high pressure hydraulic system which minimizes the actuator size, (2) an efficient swaging schedule which re ...

    STTR Phase II 2011 Department of DefenseNavy
  2. Development of Co-Mingled E and B Field Antennas

    SBC: WAVE COMPUTATION TECHNOLOGIES INC            Topic: N10AT015

    Wave Computation Technologies and Duke University will develop minimally coupled, co-mingled E and B field antennas through numerical and experimental investigations based on first-principle theories. The project objectives are to (a) develop the simulation capability for modeling superconducting quantum interference filter devices and the related B field antennas, (b) make appropriate designs of ...

    STTR Phase II 2011 Department of DefenseNavy
  3. Low Loss High Power Current Lead for Cryogenic Applications

    SBC: TAI-YANG RESEARCH COMPANY            Topic: N10AT022

    The Tai-Yang Research Company in partnership with the Center for Advanced Power Systems at Florida State University proposes to develop a warm-to-cold electrical termination for a cryogenically cooled high temperature superconductor cable. The termination will be optimized for the requirements defined by the Next Generation Integrated Power System. The proposed termination will include a novel met ...

    STTR Phase II 2011 Department of DefenseNavy
  4. Performance Enhancement for 4 K Pulse-Tube Cryocoolers

    SBC: CREARE LLC            Topic: N10AT026

    Future military communication systems will rely on advanced superconductor digital electronics. These electronics will require efficient cooling at low temperatures near 4 K. Pulse-tube cryocoolers are a candidate cooling technology for this application. We propose to improve the efficiency of the pulse-tube cryocooler by addressing one of its primary performance limitations, namely the performanc ...

    STTR Phase II 2011 Department of DefenseNavy
  5. Wave Front Imaging for Dense Sprays

    SBC: CREARE LLC            Topic: N10AT027

    The performance of modern combustion systems used in propulsion devices (such as gas turbine main combustors, augmentors, and rockets) is largely dependent on the mixing of fuel and oxidizer. This mixing process, often involving a liquid jet emanating into a gaseous flow followed by subsequent breakup and atomization, is critically important to many performance metrics including thrust, efficiency ...

    STTR Phase II 2011 Department of DefenseNavy
  6. Innovative Passive Magnetic Thrust Bearings for High-Speed Turbomachinery

    SBC: MAINSTREAM ENGINEERING CORP            Topic: N10AT037

    In miniature gas turbines for UAV applications, traditional bearings exhibit a typical lifetime of only 25 hours due to excessive axial loading. Mainstream proposed a passive permanent magnet thrust bearing to alleviate this problem and increase service life to over 1000 hours. Since this type of bearing is non-contacting, it can operate at very high rotational speeds with minimal heat generation ...

    STTR Phase II 2011 Department of DefenseNavy
  7. Hybrid Absorption/Vapor-Compression System for Shelter Air Conditioning

    SBC: MAINSTREAM ENGINEERING CORP            Topic: OSD09T002

    Unnecessarily high battlespace fuel consumption degrades operational capability, increases force balance problems, exposes refueling convoys to high risk, and increases operating and support costs. Currently, military shelters are cooled by vapor compression air conditioners powered by diesel electric generators. Diesel generators, which are overwhelmingly used for shelter cooling at forward bases ...

    STTR Phase II 2011 Department of DefenseNavy
  8. Microfluidic High-throughput Platform for Determining Kinetic Constants of Enzyme Variants

    SBC: CFD RESEARCH CORPORATION            Topic: CBD10107

    Current high-throughput platforms rely on labeled substrates that produce detectable spectroscopic signals upon reaction for monitoring enzyme catalytic activity. Add to that the high price tag for these instruments, ranging from several hundred thousand to millions of dollars, and there is a clear need for alternate solutions for a label-free, low-cost, high-throughput enzyme screening platform. ...

    SBIR Phase II 2011 Department of DefenseOffice for Chemical and Biological Defense
  9. A Novel Microfludic Device for Drug Toxicity Studies

    SBC: CFD RESEARCH CORPORATION            Topic: CBD10103

    Current drug discovery and development efforts are severely limited by expensive animal trials and oversimplified in vitro models. Results obtained from in vitro models are not predictive of in vivo toxicity owing to significant difference from the in vivo physiological conditions. In this context, we propose to develop and demonstrate a novel microfluidic device that reproduces the physiological ...

    SBIR Phase II 2011 Department of DefenseOffice for Chemical and Biological Defense
  10. Keratin Biomaterials for Cranio-facial Tissue Engineering

    SBC: Keranetics, LLC            Topic: OSD09H10

    The majority of personnel injured in OIF/OEF have suffered blast injuries from IEDs. Blasts often cause cranio-facial trauma that is difficult to repair surgically. The current standard of care involves the placement of fixation devices and off label use of growth factor carriers. These strategies often require multiple surgical interventions creating a significant need for better technologies ...

    SBIR Phase II 2011 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government