Award Data

Radio Frequency (RF) Fingerprinting is an important capability for the warfighter to identify threats and protect against malicious attacks on the RF spectrum. Most RF Fingerprinting techniques work by identifying small variations in a transmitted signal that are introduced by hardware components (capacitors, inductors, etc) of the transmitter within the non-linear regions of operation. Neural Net ...

Mezzo and its partners will design, manufacture, and test a supercritical CO2 recuperator designed for high pressure of 275 bar and high temperature of 800 0C. The recuperator will incorporate a new manufacturing approach (laser welded micro tubes) that offers potential to reduce cost. It is well known that recuperator costs are currently very high for applications that involve high temperature an ...

Mezzo and its partners will design, manufacture, and test a supercritical CO2 recuperator designed for high pressure of 275 bar and high temperature of 800 0C. The recuperator will incorporate a new manufacturing approach (laser welded micro tubes) that offers potential to reduce cost. It is well known that recuperator costs are currently very high for applications that involve high temperature an ...

This proposal is to prove the feasibility of a new and novel zinc-based alloyed coating on both the manufactured Grade 270 0.5 and 0.6 low-relaxation strands and for the individual wires used to make the 7-wire strand for prestressed concrete used in bridge construction. The application of the coating will use CAP Technologies LLC [CAP] proprietary and patented foam plasma technology also kn ...

Positioning and navigation have become a mainstay of everyday life in the U.S.; applications of interest include navigation of vehicles of all kinds, infrastructure mapping, and safety of life systems. Many of these recent applications have become possible through the GPS. With the recognized vulnerabilities of GPS, it is evident that equivalent backup systems must be developed. One possible so ...

Special Operations forces (SOF) operate in all weather conditions. It has identified a need for a micro-cooling system that can be vehicle mounted and man-portable, as well as provide a capability to cool vehicle mounted communications and electronics equipment. To meet the needs of SOF the system must be small, lightweight, quiet, low power, and gasless. We propose a compact micro-cooling system ...

"Our Phase I study proved the feasibility of using monofilament carbon tow and thin resistant wire in a glove system to provide an adequate heat source to keep a soldier's hands comfortable in extreme cold temperatures while retaining hand dexterity andtactility. Our objectives during Phase II are to (1) incorporate our heat generation process into a super thin, non-melting, flame-rerardant materi ...

The objective is to modify and test gas turbine engines presently installed in/on marine craft to demonstrate that by adapting technology used on street legal vehicles can be used to reduce the heat and noise levels in marine craft. Whether or not the IR15dB level or lower, and the above water acoustic/noise level to 60dB level or lower can be achieved, is a matter that can only be demostrated by ...

This Phase I SBIR Project will involve performance of a study to evaluate current commercial display technologies, head-mounted and wrist-mounted display configurations, and software that could fulfill the SOF requirements. The study will emphasizeidentification of the best display at the lowest power consumption. Based on the evaluation of current practice, innovative technology ideas will be pre ...

N/A