You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Advanced Instrumentation for Non-Nulling Stack Velocity Testing
SBC: AIRFLOW SCIENCES CORP Topic: NoneIndustrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray
SBC: H3D INC Topic: NonePhase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...
SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology -
Development of a Neutron-based Nondestructive Test Method for Concrete Petrography and Chemical Analysis
SBC: TOURNEY CONSULTING GROUP, LLC Topic: NoneTo evaluate the technical feasibility of prompt gamma neutron activation (PGAA) as an alternative to a set of standard destructive tests of concrete petrography including aggregate type, water/cement ratio, aggregate/binder ratio, density, chloride content and chloride bulk diffusion constant; and to determine the specifications for the design of a dedicated commercial laboratory-based PGAA facili ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
Predictive Modeling Tools for Metal-Based Additive Manufacturing
SBC: 3DSIM LLC Topic: 9010673R3DSIM will provide a solution to additive manufacturing’s lack of efficient, composable physics-based computational frameworks to predict quality and performance for arbitrary geometry, orientation, location and process parameter combinations. A new set of composable computational tools capable of accurately predicting the geometrical accuracy, residual stress and microstructure of the parts mad ...
SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology -
Large-Area, High-Uniformity Photodiodes for Infrared Trap Detectors
SBC: AMETHYST RESEARCH INC Topic: 9020168Rmethyst Research Inc. will design, fabricate and test a high uniformity, large area, low noise infrared trap-detector detector for the 1- 4.5 μm wavelength range. This state of the art detector will have a large area (e.g., 1-1.8 cm diameter active area) with a spatial variability of internal quantum efficiency of less than 0.1 % between 1 μm and 4.5 μm. In addition, the internal quantum effici ...
SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology -
Decision Support Tools for Sustainable Manufacturing
SBC: BIMCON Inc. Topic: N/AThe objective of this proposal is to establish the feasibility of developing an integrated decision support tool that transforms the current time-consuming and reactive (post-design) sustainability assessment into a real-time, proactive approach available in the early phases of product design. This tool, called Sustainability Integrated into Early Design (SIED), will define and capture lifecycle-w ...
SBIR Phase I 2010 Department of CommerceNational Institute of Standards and Technology