Award Data

Foster-Miller, Inc. (FMI) in association with Schwartz Electro Optics, Inc. (SEO) proposes to develop a novel in-situ real-time sensor for monitoring Molecular Beam Epitaxy (MBE) growth processes. These sensors will be based on laser induced atomic fluorescence, which is the method of choice for trace analysis of atomic species in the low pressure MBE environment. The enabling technology is the ...

We proposed to develop an application development framework based on mobile code language called Agents, Agencies, Artifacts, & Appliances. The key innovated feature of this framework is the support for development of collaborative applications and the support for higher level design patterns rather than low level user interface construction. The framework will be based on an object oriented MIT ...

Currently available rad curable resins such as acrylates are inhibited by oxygen in ambient air, lack thermal stability and have poor fracture toughness. Recent Rad curable BMIs and epoxies suffer from voids due to lack of processability. Aeroplas Corporation International (ACI) proposes to demonstrate and further develop their line of atomic oxygen resistant (AOR) E-Beam curable composite resin ...

There is a need for simple, light-weight practical instrumentation for rapid characterization of chemical and biological analytes in the modern battlefield. Recently, a surface-sensitive diode laser (SSDL), having over 1% of the mode power in the region extending 40 nm from the laser surface has been designed and fabricated. The SSDL was capable of monitoring the deposition of absorptive films a ...

Various diesel reforming methods have been tried to develop an efficient and reliable means of providing hydrogen to fuel cell power systems promising high efficiency and low pollution. The most difficult obstacle has been coking up of reformers. Aspen proposes to solve the coking problem through an approach based on two proprietary technologies: catalytic diesel cracking and hydrogen separati ...

Improved magnetic and electromagnetic sensors covering a wide range of frequencies, 0 to 10kHz, and with extremely high sensitivity are proposed for broad area detection and characterization of underground targets. The sensors can be used for a variety of applications and for different e.m. sources. They can be configured as gradiometers, as vector or scaler sensors and can be used as internette ...

Development of Vertical Cavity Surface Emitting Lasers for 1550nm communication applications has been hindered by the lack of high quality Bragg mirrors. Efforts for growing high quality InGaAsP/InP, SbGaAsAI/InGaAsP as well as wafer-bonding with GaAs/AIOx mirrors are on-going but significant breakthroughs in material quality and yield are needed before devices are produced. In addressing this ch ...

We propose to develop a generic modular microanalytical system which will integrate sample workup, separation and detection on a chip. It is the ultimate goal to provide chip-based assays dedicated to a predetermined set of analytes. This analyzer will replace more expensive and complex gas chromatographic and mass spectroscopic instruments in numerous applications in the field and laboratory. ...

The proof of concept research explores the potential for integrating the following four 'personal devices's () baseline IFF personal device () data applique interface to field processors () audio applique interface to voice headset or audio monitor () video applique interface to camera and display into a single, wearable non-line of sight spread spectrum IFF, tracking and duplex multimedia com ...

N/A