List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Decontamination of Category A Viruses on Porous Surfaces and Sensitive Equipment

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER4A

    METSS will demonstrate the feasibility of utilizing two separate technologies, chlorine dioxide (ClO2) and Hot Air Decontamination (HAD; high temperature/low humidity) as on-site decontamination processes for treating_x000D_ Category A virus contaminated items including porous materials (e.g., upholstery, bedding, fabric, carpet, unpainted wood); sensitive equipment; and potentially reusable mater ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Renewable Bioplastics Production

    SBC: Altex Technologies Corporation            Topic: 17NCER5A

    Altex’s Renewable Bioplastics Production (RBP) technology meets the Greener Plastic Manufacturing needs; to eliminate harmful-petrochemical feed sources, to accomplish toxic-free, low-energy, low cost bioplastics production, to reduce Green House Gas (GHG) emissions, and to have environment friendly-biodegradable bioplastics. Altex’s proposed RBP technology combines a novel feeding-sizing-pret ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Greener Plastics with High Heat Tolerance for Additive Manufacturing

    SBC: Intelligent Optical Systems, Inc.            Topic: 17NCER5B

    Advances in materials and automation are rapidly reshaping the American manufacturing economy. These advances must be embraced to sustain a strong manufacturing sector in the United States. Additive manufacturing is possibly the fastest growing example of this trend, growing at an astonishing compound annual growth rate of 25.7%. The plastic materials market for additive manufacturing, valued at $ ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Green Process for Plastic Chrome

    SBC: VERGASON TECHNOLOGY, INC.            Topic: 17NCER5B

    This green approach to manufacturing plastic with decorative chrome will eliminate health and environmental hazards from the chrome electroplating process. The US and global market for decorative chrome on plastic is 12 million m2/year and 84 million m2/year respectively, with 80% in automobile trim, 10% in appliances and 10% in sanitary fixtures. Without a viable commercial alternative, US provid ...

    SBIR Phase I 2018 Environmental Protection Agency
  5. Feasibility of rPET Lignin-Content Polylols for Significant Reduction of Halogenated Flame Retardant in Construction Spray Foam

    SBC: Resinate Materials Group, Inc.            Topic: 17NCER6A

    This EPA SBIR Phase I Research and Development proposal will demonstrate feasibility of reduction in halogenated flame retardant use in polyisocyanurate foams prepared from lignincontent rPET polyols. The study will show whether or not the lignin rPET polyol formulations meet ASTM flame retardancy standards and thus reduce or eliminate the need for halogenated fire retardants (HFRs) in spray foams ...

    SBIR Phase I 2018 Environmental Protection Agency
  6. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
  7. A Green Rooftop System for Commercial Buildings with Superior Energy Efficiency

    SBC: XIMAX Technologies Corporation Ltd            Topic: 17NCER6B

    This proposed project will develop a highly modularized green rooftop system that is not only longlasting but also assemble-able/disassemble-able. At roofs' end-of-life, it can be disassembled and_x000D_ 100% recycled. At buildings' end-of-life, if the roof still has enough useable life, it can be disassembled and reused elsewhere. Major environmental benefits of this technology are 1) nothing fro ...

    SBIR Phase I 2018 Environmental Protection Agency
  8. Indoor Formaldehyde Detection by a Low-Cost Chemical Sensor Based on Organic Nanofibers

    SBC: Vaporsens, Inc.            Topic: 16NCER1A

    Need: People are exposed to formaldehyde, a carcinogen found in building materials. Highly sensitive, real-time formaldehyde sensors would improve human safety by alerting users to harmful concentrations. _x000D_ _x000D_ Technical Feasibility: Vaporsens produces chemical sensors based on novel organic nanofiber technology. Phase 1 results demonstrated high selectivity, rapid-response time, and dem ...

    SBIR Phase II 2018 Environmental Protection Agency
  9. Inexpensive Formaldehyde Sensors for Indoor Air Quality (IAQ) Applications

    SBC: Giner, Inc.            Topic: 16NCER1A

    Recognizing the need to monitor formaldehyde gas in residential and industrial buildings,_x000D_ Giner, Inc. (Giner) will continue the successful work started in Phase I and will develop,_x000D_ fabricate and demonstrate a formaldehyde gas monitor that is capable of continuously_x000D_ measuring formaldehyde in the range of 0-2000 parts per billion (ppb) with a resolution of 10 ppb. The wireless c ...

    SBIR Phase II 2018 Environmental Protection Agency
  10. A GREEN AND UNIQUE THERMOSETTING-THERMOPLASTIC POLYCARBONATE

    SBC: INSTRUMENTAL POLYMER TECHNOLOGIES, LLC            Topic: 16NCER2B

    Of the 300 million tons of plastic produced per year most will require 500 years to biodegrade. Currently only 9% is recycled, and 50 million tons of thermoset plastic produced annually that can't be recycled. _x000D_ _x000D_ This project will develop a sustainable and easily biodegradable polycarbonate plastic that is uniquely a recyclable thermoset resin. We call it a thermosetting thermoplastic ...

    SBIR Phase II 2018 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government