You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Multiple Hit Performance of Small Arms Protective Armor

    SBC: Enig Associates, Inc.            Topic: A14AT017

    ENIG, in collaboration with SRI, proposes to develop a modeling methodology with predictive and inferential capabilities to address the challenges of designing body armor to resist realistic multiple impacts from burst fire events. Our toolkit will provide an end-to-end modeling capability, grounded in the statistics of realistic impacts from small-arms fire, which would address the final material ...

    STTR Phase I 2015 Department of DefenseArmy
  2. EX-SCAN: Autonomous Inspection System for Aircraft Surface Coatings

    SBC: Intelligent Automation, Inc.            Topic: AF14AT09

    ABSTRACT: Current methods for inspecting the external surface of manned and unmanned low-observable (LO) aircraft are time consuming and error prone. Technology that can reduce inspection times and minimize human error will benefit the Air Force by significantly increasing aircraft reliability and availability while reducing lifecycle maintenance costs. To address this need, Intelligent Automat ...

    STTR Phase I 2015 Department of DefenseAir Force
  3. Microelectronics Component Adhesive Selection and Design Rules for Failure Avoidance

    SBC: CFD RESEARCH CORPORATION            Topic: MDA14T002

    Thermally induced fatigue and residual stress introduced during fabrication are sources of stress related failure in microelectronics, which raises concerns about product reliability and specification. CFDRC has teamed with experts in the reliability of microelectronics packaging to develop a testing and physics based modeling protocol to correlate material properties and thermal loading conditio ...

    STTR Phase I 2015 Department of DefenseMissile Defense Agency
  4. Base Metal Electrode Capacitor Test Methods

    SBC: FUNDO SCIENCE CORPORATION            Topic: MDA14T003

    Miniaturized base metal electrodes (BME) multilayer ceramic capacitors (MLCC) are of great interest for future missile applications as designers are striving to achieve smaller, lighter, cheaper, faster and better electronic assemblies without sacrificing long-term performance. Unfortunately, screening, reliability and qualifications criteria are either not available or not standardized. In the ...

    STTR Phase I 2015 Department of DefenseMissile Defense Agency
  5. Failure Avoidance in Microelectronics through Coefficient of Thermal Expansion (CTE) Mismatch Modeling and Design

    SBC: Space Micro Inc.            Topic: MDA14T002

    Space Micro will develop the core of the decision support system, assemble the models and material properties and demonstrate the utility of the program in materials selection on a subset of failures related to a specific test-bed, which will be the attachment of quad-flat no-leads (QFN) and ball grid array (BGA) devices to printed wiring boards using different solders, underfills, QFN or BGA geom ...

    STTR Phase I 2015 Department of DefenseMissile Defense Agency
  6. Multiple Hit Performance of Small Arms Protective Armor

    SBC: TRANSPARENT ARMOR SOLUTIONS INC.            Topic: A14AT017

    This proposal will investigate body armor systems to the effects of burst fire. In Phase I, the team of researchers will investigate the spatial distribution of impacts of common burst fire capable rifles, demonstrate a statistical analysis technique, and demonstrate a ballistic model approach while applying this research to a surrogate body armor solution. The program will begin with an analysi ...

    STTR Phase I 2015 Department of DefenseArmy
  7. Higher Order Mesh Generation for Simulation of Complex Systems

    SBC: PARASIM INC            Topic: AF14AT07

    ABSTRACT: In this proposal, a team comprising ParaSim Inc. and the University of Utah will examine the feasibility of generating curved high-order meshes from hybrid linear meshes while retaining a given boundary geometry. Specifically, a preliminary design of a software package for creating high-order (up to 4th order and higher) hybrid-element meshes for complex geometries will be developed. S ...

    STTR Phase I 2015 Department of DefenseAir Force
  8. Ultra-Wideband, Low-Power Compound Semiconductor Electro-optic Modulator

    SBC: FREEDOM PHOTONICS LLC            Topic: N13AT005

    Freedom Photonics is proposing to develop a novel modulator concept. The overall objective of this program is to develop a novel compound-semiconductor electro-optic modulator that simultaneously exhibits 100-GHz operation, optical/microwave velocity matc

    STTR Phase II 2015 Department of DefenseNavy
  9. System for Precision Direction-Finding, Anti-Jam and Anti-Spoof

    SBC: TOYON RESEARCH CORPORATION            Topic: A15AT013

    Assured position, navigation and time (PNT) require constant vigilance against intentional and unintentional sources of coherent and non-coherent interference. The Global Positioning System (GPS) is especially vulnerable to attacks and must be defended through electronic protection (EP) measures such as anti-jam (AJ) and anti-spoof (AS). The proposed effort will design and demonstrate GPS-based at ...

    STTR Phase I 2015 Department of DefenseArmy
  10. Improved Turbulence Modelling Across Disparate Length Scales for Naval Computational Fluid Dynamics Applications

    SBC: COMPUTATIONAL SCIENCES LLC            Topic: N15AT002

    Computational Sciences LLC will collaborate with the Rensselaer Polytechnic Institute (RPI) to develop and validate a stand-alone computational module that naturally accounts for the effects of turbulence. Such fluctuations and transitions may be associated with compressible flows and boundary layer interactions. The module will be designed for implementation in to existing legacy codes for use in ...

    STTR Phase I 2015 Department of DefenseNavy
US Flag An Official Website of the United States Government