Award Data

FreEnt Technologies, Inc., along with A2Z Innovations, Inc. (A2Z) and the University of Alabama in Huntsville (UAH) are teaming together to design and develop a High-Speed Simultaneous Multiple Object Detection (HS-SMOD). The HS-SMOD system uses a simple but innovative technique of a passive fiber-optic grid and opto-electronic detectors to measure the initial and subsequent hit points of extremel ...

Karagozian & Case, Inc. (K&C) and the Georgia Institute of Technology (Georgia Tech) will develop a re-usable, cost-effective, and accurate dynamic characterization methodology capable of measuring the dynamic material properties of various materials of interest under very high strain rates. Materials property data for various ductile materials (e.g., steel and aluminum) are required as input to f ...

Fine powder thermal battery cathode materials can exhibit challenging flow properties which makes processing with automated presses difficult.Granulating these powders substantially improves flow properties and reduces the tendency for powder segregation during handling and pressing operations.The properties of Magnesium Oxide (MgO) that lead to good performance in thermal battery separators are n ...

The goal of the Information Assurance Run-time Auditing (IARA) Phase I project was to provide a framework that promotes the specification of software system monitoring, audit, analysis, and threat mitigation capabilities in large scale software intensive systems (LSSIS). IARA was designed to promote software assurance by incorporating novel tools that help certify the operations of untrusted soft ...

deciBel Research, Inc. and the Electrical Engineering Department at the University of Mississippi - the deciBel Team - proposes to continue to develop and mature threat physics based classification, track association/track correlation, and dynamic attributes determination threat characterization algorithms that effectively and efficiently fuse data from multiple sensors. The classification algorit ...

This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

The modern warfighter faces the constant threat of endemic infections, multi-drug resistant bacteria and Biological Warfare Agents. In order to provide accurate front-line treatment that will curtail the overuse of antibiotics, a rapid and robust molecula

Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

MATSYS proposes to adapt emerging additive manufacturing techniques (so-called 3-D Printing) for use with reactive structural materials and demonstrate this capability to rapidly fabricate reactive case. Our concept incorporates two major manufacturing steps: 3D printing of green compacts from pure Al or Al-based reactive powder blend; and Microwave (MW) sintering of green compacts into net-shaped ...

MATSYS proposes to develop, test and evaluate a scalable metal-based reactive structural material that will self-fragment to micron or sub-micron scale fuel particles when subjected to explosive shock loading, resulting in significantly enhanced metal combustion efficiency. Use of reactive material casings offers the potential for several-fold increases in blast and overpressure by generating rapi ...