Award Data

Goleta Star and the University of Florida (UFL) will jointly develop Nadir SAR 3D imaging capability from a Circular SAR orbit that can be transitioned into selected Army applications, primarily existing single-channel radars. Both Goleta and UFL have 3D imaging background and relevant capability that will jointly feed into the desired imaging technology development. In addition Goleta Star has ...

Even though nonwovens offer significant cost savings over woven fabrics, nonwovens are mostly used for disposable protective clothing, wipes, filters, and geotextiles. The low adoption rate of nonwovens in reusable garments is due to the difficulty in producing fabrics with a combination of desired properties that mimic woven fabrics. For example, a nonwoven with the drapability and air permeabili ...

Using advanced ion optics that was developed by Pacific Northwest National Laboratory (PNNL), BaySpec will develop a prototype of portable mass spectrometer (less than 40 lb. and 300W) with continuous atmospheric pressure inlet that is fully capable of uninterrupted on-line sampling from an ambient environment. The continuous nature of the inlet ensures full compatibility with separation technique ...

The modern warfighter faces the constant threat of endemic infections, multi-drug resistant bacteria and Biological Warfare Agents. In order to provide accurate front-line treatment that will curtail the overuse of antibiotics, a rapid and robust molecula

For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...

While aluminum casing materials provide some enhanced performance and thermal loading to explosive ordinance, their overall effectiveness is highly limited by incomplete combustion and long residence times. In order to reduce these problems, the casing material must be designed to facilitate rapid fragmentation through either specialized casing geometries or greatly refined initial particle sizes. ...

This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

Circadian rhythm disruption misalignment causes fatigue and a variety of physical and mental ailments, and is a clinical feature of posttraumatic stress disorder (PTSD); it is also closely linked to the severity of PTSD. BioSensics, in collaboration with the Division of Sleep and Circadian Disorders at Brigham and Womens Hospital, will develop a circadian rhythm and sleep coach, Rhythm Sleep, to m ...

This Phase I STTR project will develop a platform to demonstrate high-quality, multi-modal acquisition of neurophysiological signals, including EEG, heart rate/blood oxygenation via photoplethysmography (PPG), electrodermal (EDA) activity, temperature plus environmental factors such as ambient light and sound in a simple, wearable headband. The hardware will be coupled with the development of a cl ...

Physical Sciences Inc. in collaboration with Colorado State University proposes to develop a compact infrared flash 3D imaging sensor employing compressive sensing (CS) approaches. The CS 3D sensor offers a combination of high range resolution (10 cm), high point cloud density (6464 format), and fast 3D image frame rates (10 Hz) in a low cost, compact form factor employing commercial off the shelf ...