Award Data

ATA Engineering has developed a wavelet-based damage squeezing methodology for generating optimally compressed fatigue test signals that produce an equivalent amount of fatigue damage in a predictably reduced amount of time compared to the baseline (uncompressed) signals. Fatigue-critical signal characteristics (e.g., magnitude, phase, frequency, and sequencing relationships) are identified in the ...

Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...

In this program, Physical Sciences Inc. (PSI) will team with Professor Ali Adibi’s group at the Georgia Institute of Technology to develop a photonic integrated circuit (PIC) spectrometer that can simultaneously achieve high-resolution over wide-bandwidths using a scalable and foundry-ready approach. While a PIC-based spectrometer is a key component for on-chip Raman, fluorescence, and absorptio ...

There are currently no vaccines or therapeutics available for Marburg Virus Disease (MVD). Given the specter of weaponization and the terrible morbidity and high mortality rate of MVD, this represents a critical threat to the operational readiness of the Warfighter. While traditional vaccines have contributed greatly to public health, they have some limitations especially in the context of operati ...

The Navy faces a significant challenge to its dominance of sea and air given the Anti-Access Area-Denial (A2AD) capabilities of major powers. The Navy's response, in part, is to implement technical capabilities that enable platforms to coordinate in new ways to execute offensive and defensive actions at very long range. While the Navy finalizes this Naval Integrated Fire Control-Counter Air (NIFC- ...

During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

The U.S. Navy is seeking new technologies and platforms to advance airborne anti-submarine warfare (ASW) and related maritime surveillance. Current magnetic anomaly detection (MAD) sensors, such as the latest versions of atomic magnetometers, are capable of very low noise operation. However, the performance of these sensors can be limited by the geomagnetic noise environment more so than by eithe ...

Agiltron in collaboration with National Renewable Energy Laboratory (NREL) will develop a new class of high-efficiency and lightweight broadband inverted metamorphic multi-junction (IMM) solar cells for the uninterrupted flight missions of unmanned aerial vehicles (UAVs). The approach is closely coupled with Agiltrons extensive experience in high-transmittance broadband and wide-angle anti-reflect ...

The littoral environment is especially demanding on tactical sonar systems, in large part because the spatial and temporal variability imposes sonar system operating conditions of a nature and with a scale heretofore not encountered in the open oceans. Recent Office of Naval Research (ONR) sponsored basic research as well as fleet exercises have shown that littoral environments tactically importan ...

Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...