You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
-
3D Acoustic Model for Geometrically Constrained Environments
SBC: SOFAR Acoustics, LLC Topic: N16AT018This effort is focused on establishing an important capability of providing a comprehensive, advanced model of the three-dimensional acoustic field, including propagation, scattering, and reverberation in complex and dynamic environments. This new 3D acoustic model would feed the Navys sonar performance estimation tool with a purpose of addressing the optimal placement of sensors in complicated en ...
STTR Phase I 2016 Department of DefenseNavy -
High Fidelity Rotorcraft Towing Modeling and Simulation with Towed Magnetic Anomaly Detection System
SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC. Topic: N15AT009Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...
STTR Phase II 2016 Department of DefenseNavy -
Using Magnetic Levitation for Non-Destructive Detection of Defective and Counterfeit Materiel
SBC: Nano Terra, Inc. Topic: DLA15C001The introduction of substandard or counterfeit materials into the DoD supply chain can have extremely expensive, and potentially life threatening, consequences. Current techniques used to detect nonconforming materiel can be destructive (e.g., manual sectioning and inspection of a part), time consuming and expensive (e.g., micro-computed tomography, ultrasound), or provide only limited informatio ...
STTR Phase I 2016 Department of DefenseDefense Logistics Agency -
Light-Weight Solar Cells with High Specific Power and Conversion Efficiency
SBC: AGILTRON, INC. Topic: N14AT003Agiltron in collaboration with National Renewable Energy Laboratory (NREL) will develop a new class of high-efficiency and lightweight broadband inverted metamorphic multi-junction (IMM) solar cells for the uninterrupted flight missions of unmanned aerial vehicles (UAVs). The approach is closely coupled with Agiltrons extensive experience in high-transmittance broadband and wide-angle anti-reflect ...
STTR Phase II 2016 Department of DefenseNavy -
Marburg Virus Prophylactic Medical Countermeasure
SBC: Flow Pharma, Inc. Topic: CBD18A002Through this STTR contract, we propose to evaluate the efficacy of our vaccine, FlowVax Marburg, in nonhuman primates (NHPs). This will be achieved through four Tasks. In Task 1, we will manufacture the vaccine in a quantity sufficient for the animal studies. In Task 2, we will perform MHC genotyping on a representative population of NHPs and, based on results, select a set of MHC-matched NHPs for ...
STTR Phase II 2020 Department of DefenseOffice for Chemical and Biological Defense -
Marburg Virus Prophylactic Medical Countermeasure
SBC: MAPP BIOPHARMACEUTICAL, INC. Topic: CBD18A002There are currently no vaccines or therapeutics available for Marburg Virus Disease (MVD). Given the specter of weaponization and the terrible morbidity and high mortality rate of MVD, this represents a critical threat to the operational readiness of the Warfighter. While traditional vaccines have contributed greatly to public health, they have some limitations especially in the context of operati ...
STTR Phase II 2020 Department of DefenseOffice for Chemical and Biological Defense -
Analysis and Modeling of Erosion in Gas-Turbine Grade Ceramic Matrix Composites (CMCs)
SBC: ALPHASTAR TECHNOLOGY SOLUTIONS LLC Topic: N19BT033A significant barrier to the insertion of ceramic matrix composite (CMC) materials into advanced aircraft engines is their inherent lack of toughness under erosion and post erosion. Our team will develop and demonstrate a physics-based model for erosion/post erosion of CMC’s at room and elevated temperatures (RT/ET). The ICME (Integrated Computational Material Engineering) Physics based Multi Sc ...
STTR Phase I 2020 Department of DefenseNavy -
Fully Automated Quantum Cascade Laser Design Aided by Machine Learning
SBC: Pendar Technologies, LLC Topic: N20AT003Pendar Technologies proposes to develop a QCL simulation tools that leverage machine learning to dramatically improve the speed of QCL device design. The innovative QCL design suite proposed will benefit from recent advances made by Pendar in bandstructure engineering, laser cavity design and thermal management at the chip and the package level.
STTR Phase I 2020 Department of DefenseNavy -
Hexahedral Dominant Auto-Mesh Generator
SBC: M4 ENGINEERING, INC. Topic: N20AT004Advances in both software and computer hardware have made the finite element method the preeminent choice for analyzing highly complex systems that are of great value to the Department of Defense. The US Defense industry, however, continues to spend enormous time and resources in mesh generation, a key step in finite element analysis, despite progress that has been made in automated mesh gener ...
STTR Phase I 2020 Department of DefenseNavy -
Ambient Quantum Processor compatible with an All-photonic Repeater Architecture
SBC: CATALYTE, LLC Topic: N20AT005The significance of the problem is to deploy combined quantum communication-and-processing near to Navy applications. Our approach, when successful, would enable small, ambient operating QPUs to be connected at a distance by quantum-secure communication. Unlike bulky optical components and in-contrast to cryogenic qubits, our system, using in situ generated photons, offers a practical s ...
STTR Phase I 2020 Department of DefenseNavy