Award Data

ABSTRACT: Analysis and Applications and Associates, Inc. (AAA) proposes to develop software that evaluates effects of the hypersonic flow environment on electro-optic/infrared optical systems and vehicles for specific hypersonic flight profiles. We propose a high fidelity definition of the near-field flow, using the latest CFD and turbulence modeling technologies, to determine the environment from ...

ABSTRACT: Toyon Research Corp. and the Penn State Univ. propose research and development of innovative algorithms for classifying objects and activities observed in high-dimensional data, including video and hyperspectral imagery. The proposed algorithms include novel feature clustering techniques to enable effective characterization of intra-class and inter-class appearance variations in datasets ...

ABSTRACT: An unseeded measurement technique is proposed for simultaneous spatially-resolved measurements of density, temperature, and velocity in hypersonic wind tunnel flows with the future potential for time-resolved measurement capability. A variant of filtered Rayleigh scattering (FRS) will be developed that takes advantage of unique monotonic relationships between molecular vapor cell filter ...

ABSTRACT: Exquadrum, Inc. proposes to develop an innovative multi-mode power generation system for hypersonic flight vehicles. This system produces the required power output that the flight vehicle demands, independent of the flight characteristics at the time. However, this system will work in conjunction with the propulsion system to augment the power generation capabilities. This is accomplishe ...

ABSTRACT: Digital binocular helmet-mounted display (HMD) systems are now available that allow high resolution wide field-of-view (WFOV) digital imagery to be displayed on high resolution microdisplays. These digital HMD systems require a low-latency embedded vision processor (LLEVS) capable of implementing the necessary image processing algorithms. An SA Photonics LLEVS will be implemented on next ...

ABSTRACT: In this project, we propose to develop the baseline process to form low source-drain contact resistance to the CNTs. This includes finding the right metal stack and annealing recipe to form good ohmic contact to the CNTs. The goal is to achieve a resistance less than 25 k at per nanotube contact. To reach such goal, we will leverage the interfacial dipole alignment of conjugated polyelec ...

ABSTRACT: Speech recognition technology is in wide use today and has been successfully integrated in a number of applications. Most of these applications require a microphone located near the talker. However, when a distant microphone is used where the speaker is at some distance from the microphone as in a hands-free communication, or in a meeting room, there is a major problem with the captured ...

ABSTRACT: The objective of this proposal is to demonstrate the feasibility of a flexible, low-cost, integrated and sensitive broad spectrum optical property characterization system. We propose a hyperspectral imager designed for operation in the 300nm 2000nm spectral region with state-of-the-art spectral and spatial resolution through the use of a high density array of high finesse (F = 1000) tuna ...

ABSTRACT: This Phase I STTR project aims to develop a silicon friendly carbon nanotube field effect transistor platform technology with reduced contact resistance and wafer-scale aligned carbon nanotubes towards development of an L-band amplifier. Key innovation nuggets that will be developed include: 1) a wafer scalable process to deposit dense aligned arrays of high purity semiconducting and len ...

ABSTRACT: Carbon nanotubes (CNTs) have great potential for high performance RF applications. Theoretical study has shown that the electrical current in a CFET is intrinsically linear. Today, linearity is the underlying limitation in increasing the data transport densities of wireless networks. The complex modulation protocols used to achieve higher data rates requires linear amplifiers. Increasing ...