Award Data

Our goal in this Phase II effort is to construct and test a compact, robust testbed for generating laser-cooled strontium atoms on a mobile platform. The focus of the Phase I effort was designing and fabricating an ovenized strontium source that also serves as a 2D+ MOT cell. In Phase II, we will integrate the strontium source into an all-glass-and-silicon vacuum system maintained by a miniature i ...

We propose the design and development of LCS radar modeling for training a radar modeling engine that capture the effects of environment, weather, jamming/interference and operator actions on radar display. The purpose of this engine is to reduce or eli

Space Information Labs (SIL) and South Dakota State University (SDSU) have teamed to provide Navy an innovative, but also producible, approach to a robust mission and safety critical Li-Ion battery man-agement system across Navy platforms to include aircraft, helicopters, UAS, missiles and directed energy weapons. SILs modular and scalable Li-Ion Intelli-Pack battery system will be designed to fro ...

The computation and real-time implementation of controls in nonlinear systems remains one of the great challenges for applying optimal control theory in demanding aerospace and industrial systems. Often, linearization around a set point is the only practical approach, and many controllers implemented in hardware systems are simple linear feedback mechanisms. From proportional guidance in missiles ...

Systems Technology, Inc. proposes to use and extend new technology from the University of Florida to enable real-time use of trajectory optimization to improve the guidance of autonomous air vehicles such as those used by the U. S. Navy. These range from missiles to UAVs. Specifically this work will involve enhancements, from the University of Florida, in hp-adaptive pseudospectral optimization. T ...

Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraft maritime operation in support of Anti-Submarine Warfare (ASW). The vibratory rotary wing platform combined with the long and flexible towing cable, the low mass ratio of the towed body to the total mass (the sum of the tow body and the towing aircraft), and the rotor downwash impingement on the towed body duri ...

In this STTR effort nGimat will partner with the University of Kentucky to develop a new process for manufacturing scandia-doped tungsten powder for use in vacuum tube cathode devices. While a significant amount of research over the last several decades has shown promise for scandate cathode materials, reliable manufacturing processes that enable commercialization of this technology have remained ...

Vacuum Process Engineering Inc. in collaboration with the UC Davis millimeter wave research group proposes to develop a large scale production process for nanocomposite scandate tungsten powder for advanced high current density and long life thermionic cathodes that have been previously demonstrated by UC Davis to be superior to the commercially available state-of-the-art. The produced cathodes de ...

This proposal describes an all optical fixed wing landing system for a aircraft carrier capable of flying an aircraft all the way to landing in a RF denied environment. The precision, reliability and accuracy of this system will allow control the aircraft without the help from the pilot all the way to touch down. It will work seamlessly with UAVs and manned aircraft that have been retrofitted with ...