Award Data

Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...

During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

Digital equalizers have been the major enablers in RF communications in terms of managing component imperfections and channel impairments. Specifically, the ever increasing processing power of the dedicating computing processors has availed a steady increase in the ability of complex communication systems to deal with impairments as well as allowing higher capacities in the information transfer.On ...

This proposal is a collaborative effort between MRV Systems and the Woods Hole Oceanographic Institution. The goal is to develop a new, small, inexpensive autonomous vehicle to investigate mixed layer dynamics and turbulent mixing. The preliminary Phase I design, a Diagonally Operating Platform (DOP), is a profiling float with moveable fins. DOP will turn toward an intended direction within a few ...

Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

Materials for thermal protection are required to protect structural components of missile launching systems, space vehicles during the re-entry stage, and solid rocket motors (SRMs). Polymer resins that have high char retention (e.g., phenolic resins) are the most common matrices in the composite materials for rigid thermal protection systems (TPSs) due to their tunable density, lower cost, and hi ...

Additive manufacturing (AM) bring revolutionary capabilities and is very attractive to various commercial and military applications. However, metal AM often results in components with various defects, which may have decisive impact on their mechanical properties. To address this critical concern of AM quality, in this research, Intelligent Automation, Inc (IAI) will develop and implement a materia ...

ATA Engineering has developed a wavelet-based damage squeezing methodology for generating optimally compressed fatigue test signals that produce an equivalent amount of fatigue damage in a predictably reduced amount of time compared to the baseline (uncompressed) signals. Fatigue-critical signal characteristics (e.g., magnitude, phase, frequency, and sequencing relationships) are identified in the ...

Active imaging systems are used in degraded visual environments, like those found in marine fog and other areas with a high level of attenuation and scattering from obscurants like rain, smoke and dust. These systems are still limited in range and resolution. SA Photonics is taking advantage of new eyesafe, hybrid fiber-bulk laser technology capable of high pulse energy at high repetition rate to ...

Through this STTR contract, we propose to evaluate the efficacy of our vaccine, FlowVax Marburg, in nonhuman primates (NHPs). This will be achieved through four Tasks. In Task 1, we will manufacture the vaccine in a quantity sufficient for the animal studies. In Task 2, we will perform MHC genotyping on a representative population of NHPs and, based on results, select a set of MHC-matched NHPs for ...