List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Advanced Antenna Pattern Prediction Software

    SBC: CEM TECHNOLOGIES, INC.            Topic: AF05T018

    Accurate numerical predictions of performance of antennas on aircraft are important in many problems of avionics design and integration. In particular, such predictions are needed for determination of optimal placement of antenna on an aircraft in order to achieve required coverage. The focus of this project is an investigation and development of high-frequency computational methods and codes for ...

    STTR Phase I 2005 Department of DefenseAir Force
  2. Development of ZnO-GaN hybrid spin LED

    SBC: CERMET, INC.            Topic: AF03T020

    Cermet, Inc in collaboration with Georgia Institute of Technology proposes to develop spin Light Emitting Diode (LED) in a 24 month Phase II program. The spin LED is a simple yet powerful spintronic device that produces circularly polarized light and is a potent tool to quantify the spin injection efficiency and spin polarization efficiency.

    STTR Phase II 2005 Department of DefenseAir Force
  3. ZnO Based Light Emitters for UV/Blue Applications

    SBC: CERMET, INC.            Topic: A04068

    The goal of this effort is to grow n and p ZnO thin films by MOCVD on ZnO substrates. The primary objective of this phase I effort will be to grow p-n homojucntion and characterize the LED structure. Bandgap of ZnO will be engineered and heterojunction quantum wells will be grown. The grown device structures will be characterized for structure and quality by X-ray, PL and electron microscopy, The ...

    SBIR Phase I 2005 Department of DefenseArmy
  4. ZnO Based Light Emitters for UV/Blue Applications

    SBC: CERMET, INC.            Topic: A04068

    The goal of this program is to develop ZnO based light emitters fabricated on high quality ZnO bulk substrates. The work will focus on enhance doping of the active layers, target alloy concentrations and prototype emitter fabrication.

    SBIR Phase II 2005 Department of DefenseArmy
  5. Neural-Network-Based Adaptive Flow Control for Maneuvering Vehicles

    SBC: GUIDED SYSTEMS TECHNOLOGIES, INC.            Topic: AF04T027

    Conventional flow control methods employ actuation frequencies that are the same order as the characteristic frequency of the flow. Georgia Tech has demonstrated novel high-frequency synthetic jet actuation to modify the apparent aerodynamic shape of aerosurfaces and achieve quasi-steady flow reattachment over an otherwise separated airfoil. Practical application of this technology in dynamic ma ...

    STTR Phase I 2005 Department of DefenseAir Force
  6. Innovative, Weight Efficient, Composite/Metallic Structural Joining Concepts

    SBC: M&P TECHNOLOGIES, INC.            Topic: AF05248

    Currently aircraft composite and metal structures are joined by fastening them in place using riveted or bolted joints. Although fastened joints largely avoid concerns associated with thermally induced stresses and strains from CTE mismatches, such designs add weight, manufacturing complexity and cost to the design. Recent advances have given rise to new opportunities to increase the integrity a ...

    SBIR Phase I 2005 Department of DefenseAir Force
  7. Controllable Atomization for Supercritical Combustion

    SBC: Engi-Mat Co.            Topic: AF03T012

    nGimat Co., in collaboration with the Georgia Institute of Technology, and the Wright-Patterson AFB Air Force Research Laboratory, proposes to develop a fuel injection method and advanced numerical simulation tools for injection of fuel at supercritical conditions in aero-propulsion combustors. This project is designed to accelerate understanding and commercialization of transcritical and supercr ...

    STTR Phase II 2005 Department of DefenseAir Force
  8. Tunable, Low Mass, Low Loss, Millimeter Wave, MEMS RF Filters

    SBC: Engi-Mat Co.            Topic: AF05230

    nGimat proposed to combine ferroelectric barium strontium titanate (BST) thin film and MEMS switch technology to design and manufacture a low-cost, low-loss, millimeter wave highly tunable passband filter. A proprietary combustion chemical vapor deposition process will be used to grow the BST films. In Phase I, nGimat will design and fabricate the circuit, perform modeling and simulation, and bu ...

    SBIR Phase I 2005 Department of DefenseAir Force
  9. A versatile, novel two-step hydrogen reforming process

    SBC: Engi-Mat Co.            Topic: AF05282

    The Air Force requires a reformer technology that can handle multiple fuels and produce fuel cell quality hydrogen on demand. These include JP-8 as well as natural gas and other hydrocarbons. Many of the current technologies require multiple steps in order to remove CO or H2S impurities from the fuel stream. This creates difficulties from fuel versatility, processing and portability standpoints ...

    SBIR Phase I 2005 Department of DefenseAir Force
  10. Advanced High Frequency Tunable Filters

    SBC: Engi-Mat Co.            Topic: AF05224

    nGimat proposes to combine MEMS switches with ferroelectric technology to design and manufacture low-loss, low-cost, monolithic, frequency-agile microwave bandpass filters that can be dynamically adjusted in frequency by the application of a DC voltage. In Phase I, nGimat will design and fabricate the circuit, optimize materials, perform modeling and simulation, and build prototype tunable filter ...

    SBIR Phase I 2005 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government