List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Sapphire Optical Fiber Sensors for Structural Performance Testing up to 3000 F

    SBC: LAMBDA INSTRUMENTS, INC            Topic: A602

    The development and performance evaluation of new carbon/carbon (C/C) and carbon/silicon-carbide (SiC) composite structural components has been hampered by the lack of reliable strain sensors that can survive up to the exceedingly high temperatures (3000 F) up to which these materials must be tested. Existing off-the-shelf high-temperature strain sensors, including free filament electrical strain ...

    SBIR Phase II 2005 National Aeronautics and Space Administration
  2. A Novel Hydrogen-Fueled Propulsion System

    SBC: Adroit Systems, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1994 National Aeronautics and Space Administration
  3. Laser Brazing Process for Joining Refractory Materials to Dissimilar Metals

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase II 1994 National Aeronautics and Space Administration
  4. An Ultrasonic Biocidal System for Hydrophonic Plant Nutrient Solutions

    SBC: Biotronics Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1994 National Aeronautics and Space Administration
  5. Quantifying Confidence in the Correctness of Parallel or Distributed Software

    SBC: Cigital, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1994 National Aeronautics and Space Administration
  6. Space-Qualified 1064 nm Seed and Metrology Laser

    SBC: FIBERTEK, INC.            Topic: N/A

    Several instruments that are potential candidates for future space-based NASA missions require a highly stable, single frequency laser oscillator that is wavelength tunable. It should be a cw source with an output in the 10-100 mW range. Most of the applications either require that the wavelength be near 1064 nm or can use that wavelength. To meet many of the applications, the laser should have ...

    SBIR Phase II 2005 National Aeronautics and Space Administration
  7. Advanced, Diode-Pumped, Cavity-Dumped Laser for Space-Based Altimetry

    SBC: FIBERTEK, INC.            Topic: N/A

    N/A

    SBIR Phase II 1994 National Aeronautics and Space Administration
  8. Unobtrusive Sensor and Effector Technology with Optical Applications

    SBC: Garman Systems Inc.            Topic: N/A

    N/A

    SBIR Phase II 1994 National Aeronautics and Space Administration
  9. Transition Prediction and Laminar Flow Control in Compressible 3D Boundary Layers Using PSE

    SBC: High Technology Corporation            Topic: N/A

    N/A

    SBIR Phase II 1994 National Aeronautics and Space Administration
  10. OPTIMIZATION OF LARGE STRUCTURES IN A MASSIVELY PARALLEL ENVIRONMENT

    SBC: Mrj Inc.            Topic: N/A

    THIS PROJECT WILL PROVIDE AN INNOVATIVE APPROACH TO DESIGN PROBLEMS IN STRUCTURAL ANALYSIS THROUGH THE EFFICIENT USE OF THE CONNECTION MACHINE AND THROUGH NEW OPTIMIZATION TECHNIQUES FOR SIMD ARCHITECTURES. PROJECT OBJECTIVES WILL BE TO DEVELOP A SUPER-EFFICIENT, GENERAL-PURPOSE, ANALYTICAL/COMPUTATIONAL TOOL (COMPUTER CODE) ON THE MASSIVELY PARALLEL CM-2 COMPUTER SYSTEM. THIS TOOL CAN BE USED FOR ...

    SBIR Phase II 1994 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government