You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Instrument For Real-Time Modification of Microcircuit Boards by Laser Deposition

    SBC: Revise, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. Energy Film: A Safe Portable Source of Hydrogen

    SBC: Schafer Corporation            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  3. A Two-Dimensional Avalanche Photodiode Array Suitable for Near IR LADAR

    SBC: Silicon Mountain Design, Inc.            Topic: N/A

    SMD proposes the design and fabrication of a two-dimensional APD array. A novel APD array is proposed which requires low bias voltages, thus making it compatible with both CMOS and CCD multiplexer designs. The on-chip CMOS/CCD circuitry will allow for multiplexing of a large number of pixels to a single output. Further, each pixel in the APD array will have its own range detection circuitry allo ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. High Speed Volumetric Metrology

    SBC: VISIDYNE, INC.            Topic: N/A

    Using optical tools such a laser interferometers, the Multiple Degree of Freedom Measurement(MDFM) System developed by the University of Michigan under the ManTech program has demonstrated a high precision calibration capability for Coordinate Measurement Machines (CMMs). Building on that effort and combining it with Visidyne's 3D volumetric or global measurement concept, we propose to demonstrat ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. High Performance Piezoceramic Coatings for Ultrasound Applications

    SBC: Active Control eXperts, Inc.            Topic: N/A

    ACX proposes an innovative new process for the manufacture of smart structures using a High Velocity Oxy-Fuel (HVOF) thermal spray process. This simple, multi-step process will be capable of depositing electroded piezoceramic coatings. The coatings will be poled while still hot, reducing poling times and voltages while increasing poling efficiency. Process times will be extremely short. The pr ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. A Five Volt Lithium Battery

    SBC: COVALENT ASSOC., INC.            Topic: N/A

    In this Phase I SBIR program we propose to develop a novel high voltage (5V) lithium-ion battery suitable for portable electronics equipmentand transportation applications. Lithium-ion batteries are already commercially available and typically consist of carbon anode, non-aqueous electrolyte and lithium transition metal oxide cathode such as LiCoO2, LiNiO2 or LiMnO4. These systems have an operat ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  7. Hand Held High Resolution Imagin Devices for Aircraft Substructures

    SBC: Eikos, Inc.            Topic: N/A

    Eikos LLC will evaluate two approaches, millimeter waves and opto-acoustics, for locating edges and holes in substructure that are hidden under exterior panels and skins during aircraft assembly. These devices will work in a camera-like fashion to allow non-destructive remote imaging. Eikos has developed promising approaches to both techniques that have the potential to be low cost and easy to u ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. TOS Enhanced Phthalonitrile Resins with MDC Composite Stitching Technology

    SBC: Eikos, Inc.            Topic: N/A

    Eikos LLC will modify and enhance the chemistry of the NRL developed phthalonitrile resin to meet the 700F TOS requirements of high temperature RTM and RFI aerospace composites. Eikos is intimately familiar with the chemistry of the phthalonitrile resin because of our efforts to scale the production of the current bases resin from the laboratory to the pilot plant. Eikos has teamed with McConne ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. MiniMOP (Miniature Multipurpose Optical Pod)

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    The following proposal describes an affordable modular sensor system which can be used for tactical oceanography. The system, referred to as MiniMOP (Miniature Multipurpose Optical Pod) is teh integrated sensor package capable of measures fluorometry, luminometry, transmissiometer, salinity, tempature and water depth. The sensor package will remain module for mounting in any small AUV but develo ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. High Efficiency, Broadband, Acoustic Transucer/Arrays for Various Underwater Applications

    SBC: IMAGE ACOUSTICS, INC.            Topic: N/A

    An innovative deep submergence low frequency, broadband transducer forefficient operation is presented. The transducer uses a multiport concept (U.S. Patent 5, 184, 332) which allows back radiation to arrive in phase with the forward radiation and allows broadband depth independent operation. Because the system utilizes Helmholtz resonators, low frequency operation can be achieved. A number of ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government