Award Data

Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

The Department of Defense uses large-scale high-resolution federated simulations to propagate rocket vehicle trajectories. Runge-Kutta methods have served as a de-facto standard while conducting such simulations. However, there are several challenges while using Runge-Kutta methods for this task. Firstly, there should be exact time-step matching between federates, otherwise the states have to be i ...

Magnesium alloys have 35% lower density compared to aluminum, with improved temperature stability compared to high strength aluminum.They can also be fabricated with minimum gauge thicknesses considerably thinner than fiber composites, and are weldable, with much higher impact resistance.Traditional magnesium alloys, however, have had lower strengths than more developed aluminum alloys.Powder meta ...

The Iris Technology team which also include Northrop Grumman Aerospace Systems (NGAS) and the University of Wisconsin, is attacking the problem of high-efficiency, low-volume, space-qualified cryocooler systems.The team has a firm starting point by leveraging the Northrop Grumman Microcryocooler and the Iris Technology mLCCE (Miniature Low Cost Control Electronics).TMU enhancement will start with ...

This proposal is in response to the Defense Health Agency 2017 Phase I SBIR topic 17B-005.The approach is the use of a membrane oxygen pump using newly developed nano-thickness membranes with all the layers less than 1 micron total.Nanometer thickness membranes enable more oxygen output per surface area at temperatures of 300-600 C than current state-of-the -art 600-800 C membranes that are 50-300 ...

This proposal is to develop a Handoff Training for Combat Casualty Care (HTC3) Framework.Training is the crux of the handoff problem today. Patient handoffs are a crucial part of casualty care, both in military and civilian environments; and today handoffs are being performed in less than optimal fashion, with ineffective communications accounting for 80% of the handoff errors. Our new HTC3 Framew ...

San Diego Composites (SDC), Inc. is teamed with the University of Maine and Raytheon Missile Systems to provide the solution for corrosion of Missile Defense Agency assets in harsh marine environments: innovative design and application of high performing composite components. It is well known that composite materials are inherently corrosion resistant and possess superior properties that can be ...

The increasing penetration of MEMs devices into the commercial market has lead to an increasing demand for micro-sized electrical energy storage devices to interface with a support them. Electrochemical double layer capacitors hold significant promise as

The objectives of our Phase I effort are to characterize target sensor measurement uncertainties and feature extraction uncertainties; determine how and where, in the processing chain, these affect target discrimination and classification; show how the different sources of uncertainty lead to the cumulative uncertainty in the final decision; provide techniques that will be instrumental to optimizi ...

The goal of this proposal is to demonstrate the feasibility of novel surface preparation methods that are easier to apply on metal substrates in various field environments while still enhancing the corrosion protective performance of topcoats. This is made possible by the characteristics of a patented pretreatment technology developed at Ecosil that can be spray or immersion applied. This novel ...