You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fully Encapsulating Dielectrics for Gaseous Helium Cooled Superconducting Power Cables

    SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC            Topic: N16AT011

    The proposed program will develop dielectrics for dc superconducting power transmission cables that are cooled with cryogenic helium gas. The Dielectrics will be sealed again helium gas penetration and allow for an operating voltage of 12 kV in a pressure of 2 MPa at 50 K. The dielectrics will be designed for use with all helium facing components of power transmission systems based on CORC cables. ...

    STTR Phase II 2018 Department of DefenseNavy
  2. Quantifying Uncertainty in the Mechanical Performance of Additively Manufactured Parts Due to Material and Process Variation

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N16AT004

    Additive manufacturing is an extremely customizable process; however, variations in the chosen build parameters can lead to drastic differences in part performance. The performance variation due to process parameters is still not well understood, and propagating all uncertainties from the various sources has been a challenge. Sources of AM parts’ performance variability include uncertainties in ...

    STTR Phase II 2018 Department of DefenseNavy
  3. Optimized High Performance Stainless Steel Powder for Selective Laser Melting Additive Manufacturing (AM)

    SBC: SHEPRA, INC.            Topic: N16AT007

    Stainless steel is a vital component of many air, land and sea systems that support the Navy warfighter. In particular, 17-4 precipitation hardened stainless steel, (17-4 PH SS) with its extrodinary combination of strength, ductility, high temperature performance and corrosion resistance plays an important role in supporting the warfighter. When processed conventionally, 17-4 PH SS typical exhibit ...

    STTR Phase II 2018 Department of DefenseNavy
  4. Medium Voltage Direct Current (MVDC) Fault Detection, Localization, and Isolation

    SBC: ISSAC Corp            Topic: N16AT009

    During the Phase II effort, the ISSAC Team will investigate several objectives and questions posed in Phase I efforts, in order to best develop a draft specification for NGES MVDC DLI systems. This includes exploring notional and conceptual architectures and discerning thresholds for DLI parameters; exploring individual and hybrid protection plan technologies to drive performance requirements for ...

    STTR Phase II 2018 Department of DefenseNavy
  5. Medium Voltage Direct Current (MVDC) Grounding System

    SBC: CONTINUOUS SOLUTIONS LLC            Topic: N16AT012

    During the Phase 1 effort, there were several achievements toward the design of grounding systems for MVDC architectures. For one, the common-mode equivalent circuit (CMEC) modeling approach that was derived at Purdue under ESRDC funding, was validated in a reduced-scale hardware setup at Purdue. The system studied consisted of a single generator, active rectifier, inverter, and propulsion machine ...

    STTR Phase II 2018 Department of DefenseNavy
  6. Modular Thermal Management System for Electronics Enclosures

    SBC: MAINSTREAM ENGINEERING CORP            Topic: N16AT014

    The heat load from Navy combat system electronics housed in Mission Critical Enclosures (MCEs) continues to increase. During Phase I, Mainstream designed and demonstrated a modular, scalable thermal management system (TMS) for existing and future MCE cabinets with triple the cooling capacity of the legacy TMS. In Phase II, Mainstream will transition the TMS to the Navy for retrofit and next-genera ...

    STTR Phase II 2018 Department of DefenseNavy
  7. Epitaxial Technologies for Gallium Oxide Ultra High Voltage Power Electronics

    SBC: AGNITRON TECHNOLOGY, INC.            Topic: N16AT023

    xß-Ga2O3 has emerged as a potentially disruptive semiconductor with a predicted breakdown field of ~8 MV/cm which is more than twice the breakdown field for the incumbent wide bandgap semiconductors GaN and SiC. The availability of ß-Ga2O3 bulk substrates sets this material apart from other wide bandgap materials for power electronic applications. However, the challenge is to find suitable epita ...

    STTR Phase II 2018 Department of DefenseNavy
  8. Phase-Change Materials for Tunable Infrared Devices

    SBC: PLASMONICS INC            Topic: N17AT020

    There is a critical need for the development of dynamic IR materials that can be used to form device level components and systems necessary for mid to long wave infrared (3-12 µm) applications. To meet these future needs, the team proposes to develop tunable optical elements based around metamaterial surfaces or metasurfaces. Metasurfaces are a class of engineered materials where arrays of sub-wa ...

    STTR Phase II 2018 Department of DefenseNavy
  9. Cyber Ready-and-Aware Mindset for Protection and Resilience against Threats (Cyber RAMPART)

    SBC: SOAR TECHNOLOGY INC            Topic: N17AT023

    We propose to develop Cyber RAMPART as an extensible and customizable training delivery tool with near-term transition potential. It will offer shipboard operations personnel the opportunity to develop foundational cyber awareness knowledge and skill that prepares them to participate in their ship’s cyber defense mission and to hit the ground running in future fleet-level exercises that include ...

    STTR Phase II 2018 Department of DefenseNavy
  10. Principled Design of an Augmented Reality Trainer for Medics

    SBC: UNVEIL LLC            Topic: DHP17A003

    Augmented reality (AR) offers the ability to enhance existing combat medic training by including perceptual cues and adaptive training elements to traditional simulation-based training using manikins. Unveil has developed a training system called the Macrocognitive AR Trainer (MART). MART is designed to foster the development of macrocognitive skills (e.g., sensemaking, assessment skills, mental m ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government