Award Data

Applied Physical Sciences and the University of Maryland propose to develop a magnetostrictive transducer that harvests electrical energy from shipboard machinery while simultaneously suppressing vibration to improve the ship’s stealth characteristics and thereby improving the performance of hull mounted sonar systems. Analysis performed during the Base Effort will provide an initial design spec ...

Applied Physical Sciences (APS) and the Pennsylvania State University Applied Research Laboratory (ARL/PSU) will collaborate in the development of a novel sensor system to measure the low frequency acoustic pressures within a fluid-filled pipe. The proposed concept improves upon the Navy’s current Array Based Acoustic Measurement (ABAM) system for laboratory characterization of full-scale piping ...

Transphorm proposes to demonstrate a normally off fast high voltage Gallium Nitride power switch solution. The switch would block to 1200V, have a threshold voltage greater than 5 V, and the phase 2 switch will target an on resistance less than 15 ohm-mm and current more than 1 Amp. To accomplish these targets, Transphorm will combine the design requirements of realizing a high (and positive) thre ...

High power microwave (HPM) sources have been developed over the past few decades for many important DoD missions ranging from electronic warfare to intentional EMI to impulse radar. In this proposal, we describe an integrated program that seeks to develop innovative solutions based on mesoband source and antenna technology to improve the effectiveness of HPM-based BMD systems. Our research will ...

The proposed effort develops the understanding required to assess the utility of using OAM states and quantum entanglement as a novel protocol for quantum key distribution for propagation through an aberrating medium such as the atmosphere. In addition a conceptual design of an experiment that is appropriate to further the development of this capability will be developed on the proposed Phase I e ...

Thermopile arrays manufactured using integrated process compatible materials and micro-machining will provide high performance with low manufacturing cost. Black Forest Engineering (BFE) teamed with Case Western Reserve University will design thermopiles using silicon based semiconductors and compare performance. Low cost thermopiles, differentially coupled with advanced BFE CMOS readout, will pr ...

In today’s information age, there are vast resources of data on every region of the Earth. The application of geospecific imagery over large areas has been limited to terrain for the most part. The hindrances to full use of geospecific imagery are the labor required to create the databases, and limits on the rendering capacity of current image generators (IGs), both in polygon count and texture ...

We propose to demonstrate and advance several key aspects of our novel, scalable ammonothermal technology for growth of high quality single crystal gallium nitride. Specifically, we propose to demonstrate a high growth rate and high crystalline quality, to design and analyze a pilot-scale reactor, and to construct and validate a quantitative model to describe the fluid dynamics of the growth envi ...

Lithium-air battery consists of a lithium anode electrochemically coupled to atmospheric oxygen through an air cathode. The major advantages of lithium air batteries are that air cathode active material, oxygen, is not stored internal to cell system and lithium anode being extremely lightweight metal with a highest theoretical specific energy density. This energy density is well comparable with t ...

This Small Business Technology Transfer research project addresses the perception and learning of complex sound patterns within complex auditory scenes. The objective is to model auditory signal processing, pattern recognition and learning in the human auditory system. Our novel approach simulates the nonlinear signal processing that has been observed in auditory physiology. By mimicking functiona ...