Award Data

The economical use of hydrogen as a transportation and stationary power fuel remains a long-term DOE objective. Energy storage applications in Europe such as wind capture and improved biogas conversion efficiency are also driving significant interest in hydrogen production from renewable sources. New and efficient catalytic processes for hydrogen generation are therefore needed to achieve produc ...

The Groundbased Nuclear Detonation Detection Research and Development office seeks advanced technology for the monitoring of explosion events using infrasonic signatures. Silicon Audio, Inc. and The University of Texas at Austin are working together to develop a microelectromechanicalsystem (MEMS) based piezoelectric infrasonicsensor technology. The sensor aims to exceed all of the threshold speci ...

Metal photoinjector cathode development has shown recent promise with nano-patterning technology. However, in order to be competitive with semi-conductor cathodes, a further enhancement in efficiency is needed. TECHNICAL APPROACH Specific nano-patterning of sub-wavelength features to produce antennae provides coupling of incoming laser light with the surface of the metal cathode. Bowtie nano-anten ...

Small Modular Reactors (SMRs) are one of the most compelling options for meeting the growing clean energy demands of the U.S. While safer and costing less to build and operate than their conventional counterparts, the unique requirements of SMRs pose significant challenges to the maintenance of their I & amp;C systems, especially due to the likelihood of fewer process sensors. Lacking the sensor ...

The DOEs & quot;Monitoring Verification and Accounting (MVA) program goal is to confirm permanent storage of CO2 in geologic formations by real-time monitoring should CO2 leak. Remote technologies, effective for atmospheric or above ground CO2 monitoring, are ineffective for subsurface, and it is where leakage can be detected first. By the time leaked CO2 slowly appears on the surface, CO2 may hav ...

The feasibility for fusion as a practical energy source needs to be enhanced significantly by removing some of the restrictions that low-temperature superconductors put on the fusion magnet systems. This can be done by using high-temperature superconductors, allowing for much larger temperature margins, a higher magnet performance and less mechanical degradation during operation. There are curren ...

Bright coherent light sources in the soft x-ray region of the spectrum are useful for a variety of applications of interest to DOE in the basic sciences, nanoscience and biology, and for technological applications. At Free-Electron Laser Facilities, peak power output of the x-ray pulses is enhanced by using a mid-infrared laser pulse instead of a near-infrared pulse. The current front end for mid- ...

We need transformational manufacturing technologies for fabrication of nanomaterials for manufacturing batteries and capacitors that will have a huge impact on improving the energy and power density of batteries and capacitors for transportation, energy storage and consumer electronics applications. Development of novel nanomaterials with high energy and power capability and a novel, nontraditiona ...

The demands of the solar energy market require the development of advanced photovoltaic technologies. The DOE is seeking to develop organic PV technologies that are more efficient, long lasting and cost competitive to traditional ones. Organic PV (OPVs) have become well recognizedas an important candidate for future solar power products, although their efficiency is not exceeding 6-7%. The overal ...

Despite significant advancement in PV technology and efficiency, qualification testing and market penetration, actual performance in the field of operation under a myriad of environemental constraints remains an important topic. PV arrays are subject to degradation mechanisms that can significantly impact power production capability. For revenue-critical PV arrays, detection of underperformance an ...