You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: Kapteyn-Murnane Laboratories, Inc. Topic: N10AT012
We propose to design a high average power Er:Fiber ultrafast laser system which is pumped at 14xxnm, and at the same time solve other problems related to ultrashort pulses in fiber lasers. The advantage of using 14xxnm pumping is the reduction of the standard quantum defect from 37% to 5%, thus greatly reducing the thermal load on the system, which makes it inherently more efficient. We also inten ...STTR Phase I 2010 Department of DefenseNavy
SBC: N&R ENGNERING MGT SUPPORT SVCS Topic: N10AT010
The Phase I deliverable will be a physic-based model which represents a CMC gas turbine component concomitantly at the material level and the structural level. This model will be probabilistically analyzed to account for the uncertainties in material properties and the uncertainties in the size and impact velocities of possible foreign objects (FOD). A ceramic material must display sufficient capa ...STTR Phase I 2010 Department of DefenseNavy
SBC: Nastec, Inc. Topic: N10AT037
A unique type of air lubricated thrust bearing called a Wave Bearing is proposed to assist a rolling element bearing to carry the thrust load and to improve the bearing’s life when used in a micro gas turbine engine. The Wave Bearing technology will provide improved reliability, safety and life compared to rolling element bearings used alone, as well as to allow simplification of engine design a ...STTR Phase I 2010 Department of DefenseNavy
Characterization of Diffusive Noise Fields Using Ambient Noise Interferometry, Spatial Gradients and Acoustic Bright SpotsSBC: Rocky Mountain Geophysics, Llc Topic: N10AT004
We propose to conduct a feasibility study for utilizing broadband sampling of the diffusive noise field in a dynamic environment. In ambient noise studies, the ability to resolve a wavefield is proportional to its time-bandwidth (TB) product. In a dynamic environment such as in the atmosphere or ocean, the nature of the impinging wave field is changing rapidly so that only short time segments can ...STTR Phase I 2010 Department of DefenseNavy
SBC: SCIENTIFIC FORMING TECHNOLOGIES CORPORATION Topic: N10AT028
While there are established methods available in determining the fatigue life of critical rotating components, there is still room for improvement for better understanding and prediction of life limiting factors. Improved risk assessment of jet engine disk components would require probabilistic modeling capability of the evolution of microstructural features, residual stresses and material anomali ...STTR Phase I 2010 Department of DefenseNavy
SBC: SMD Corporation Topic: N10AT016
In this project we propose to demonstrate the feasibility of an external pipe sensor for measuring sound pressure levels in submarine piping systems. The sensor consists of flexible PVDF wire wrapped a number of integral turns around the pipe exterior. The charge/voltage output of the sensor can be shown to be directly proportional and highly sensitive to the amplitude of the contained fluid pulsa ...STTR Phase I 2010 Department of DefenseNavy
SBC: Strategic Insight, Ltd. Topic: N10AT018
The research objective is to develop Modeling and Simulation (M&S) tools to accurately predict the performance of new state-of-the-art material systems as protection for high value missiles deployed in their launchers or canisters. The focus is on adapting multi-layered novel and non-traditional material technologies to improve protection against penetration and fragment impacts, focused detonatio ...STTR Phase I 2010 Department of DefenseNavy
SBC: Strategic Insight, Ltd. Topic: N10AT002
The research objective is to develop a fully functional computational method for prediction of the after-burning effect of different fuels in a wide range of temperature, pressure, and turbulence regimes. Achievement of the objective requires understanding and modeling of key phenomena including (a) post-detonation response of the fuels, (b) near-field coupling of detonation products with particul ...STTR Phase I 2010 Department of DefenseNavy
Fracture Evaluation and Design Tool for Welded Aluminum Ship Structures Subjected to Impulsive Dynamic LoadingSBC: Thornton Tomasetti, Inc. Topic: N10AT041
Aluminum as a structural material for naval applications has a number of advantages over steel, owing mainly to significant weight reductions which translate to higher speed and range attainable by aluminum vessels. A comprehensive study of research needs for aluminum structures conducted under the ONR program identified the key research areas, which included material behavior and fracture evaluat ...STTR Phase I 2010 Department of DefenseNavy
SBC: ZEL TECHNOLOGIES, L.L.C. Topic: N10AT004
Non-invasive, stealthy nature of passive remote sensing combined with its low cost make passive techniques a promising supplement or replacement of traditional active remote sensing techniques. Coherent processing of diffuse wave fields has a proven potential for remote sensing of stationary environments. The proposed research extends noise interferometry to characterization of dynamic environment ...STTR Phase I 2010 Department of DefenseNavy