You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Optimized Higher Power Microwave Sources

    SBC: METAMAGNETICS INC            Topic: N19AT001

    HPM (high power microwave) weapons could disable vehicles, enable vehicle recovery, and reduce collateral damage. Metamagnetics, in partnership with Professor Jane Lehr (University of New Mexico), and General Atomics propose a completely solid-state HPM system based on their work in Gyromagnetic Nonlinear Transmission Lines (gNLTL) and compact High-Gain Slotted Waveguide Antennas. The system will ...

    STTR Phase I 2019 Department of DefenseNavy
  2. Interlaminar Reinforcement of Composite Rotorcraft Components via Tailored Nanomorphologies of Aligned Carbon Nanotubes (A-CNTs)

    SBC: METIS DESIGN CORP            Topic: N19AT003

    Composites are often used in aerospace applications due to their superior specific strength and stiffness properties, as well as their resistance to fatigue and corrosion. In particular for rotorcraft, composites offer additional benefits for their versatility in tailoring material properties for such components as rotor blades. However, rotors introduce additional challenges by including multiple ...

    STTR Phase I 2019 Department of DefenseNavy
  3. Targeted Enhancement of Critical Composite Interfaces using Vertically Aligned Carbon Nanotubes

    SBC: N12 TECHNOLOGIES, INC.            Topic: N19AT003

    Vertically-aligned carbon nanotubes (VACNTs) will be selectively applied at interfaces in laminated composite structures to effect locally the mechanical properties that limit rotorcraft structures, such as fatigue and damage tolerance. In Phase I this work will quantify these effects in CFRP and CFRP/GFRP hybrid coupons. The VACNT material will be transferred directly onto prepreg plies, but also ...

    STTR Phase I 2019 Department of DefenseNavy
  4. Catastrophic Optical Damage Mitigation in Quantum Cascade Lasers by Facet Disordering

    SBC: N2 Biomedical, LLC            Topic: N19AT004

    Quantum cascade laser optical output power is limited by laser facet catastrophic optical damage (COD). In edge-emitting semiconductor lasers COD is a thermal runaway process wherein the front facet of the laser heats under high power operation. This facet heating reduces the semiconductor bandgap which increases the optical absorption and also increases the electrical injection current in the fac ...

    STTR Phase I 2019 Department of DefenseNavy
  5. Process to Mitigate Catastrophic Optical Damage to Quantum Cascade Lasers

    SBC: PENDAR TECHNOLOGIES LLC            Topic: N19AT004

    In this program, we will develop solutions to optimize QCL fabrication processes, such as facet passivation and high thermal conductivity coatings, that will mitigate the reliability issues for high power QCL applications. In phase I, we will first evaluate all concepts and efforts that have been largely investigated for GaAs based high power diode lasers and transfer the knowledge to InP based QC ...

    STTR Phase I 2019 Department of DefenseNavy
  6. Process to Mitigate Catastrophic Optical Damage to Quantum Cascade Lasers

    SBC: IRGLARE LLC            Topic: N19AT004

    The development of a catastrophic optical damage model for quantum cascade lasers describing instantaneous laser damage at high optical power levels is proposed. The model will be validated by comparison to experimental data. Based on obtained results, changes to laser design and laser fabrication resulting in an increased damage threshold will be implemented. The work will ultimately result into ...

    STTR Phase I 2019 Department of DefenseNavy
  7. Quantum Cascade Laser Array with Integrated Wavelength Beam Combining

    SBC: PENDAR TECHNOLOGIES LLC            Topic: N19AT005

    Pendar Technologies proposes to develop the next generation of compact, high power quantum cascade laser (QCL) sources with output power exceeding 10 Watts at a wavelength of 4.6 microns. The proposed subsystem will include a DFB QCL array integrated monolithically with power amplifiers, low-loss passive waveguides resulting from ion implantation and optical elements aimed at realizing on-chip wav ...

    STTR Phase I 2019 Department of DefenseNavy
  8. Atomic Triaxial Magnetometer

    SBC: VESCENT PHOTONICS LLC            Topic: N19AT006

    Vescent Photonics and MIT Lincoln Labs (MIT-LL) propose to develop a quantum-based vector magnetometer with low size, weight, power, and cost (SWaP+C) for Navy applications. The proposed system will rely on probing magnetically-sensitive, atomic-like transitions of nitrogen-vacancy (NV) centers in diamond to provide stable, high-bandwidth readout of the vector magnetic field with sub-picotesla sen ...

    STTR Phase I 2019 Department of DefenseNavy
  9. Power-Dense Electrical Rotating Machines for Propulsion and Power Generation

    SBC: CONTINUOUS SOLUTIONS LLC            Topic: N19AT007

    The primary objective is to develop electric machine/drive topologies and power architectures that achieve the power densities required for 50% more power without the increase in weight or space requirements. In addition to PMSM-based designs, two new machine topologies will be considered. The first is a trapped flux coreless (TFC) machine that utilizes superconducting pucks made of YBCO to produc ...

    STTR Phase I 2019 Department of DefenseNavy
  10. 3-Band Picosecond High Energy Compact Laser System

    SBC: Q-PEAK INCORPORATED            Topic: N19AT009

    The Navy seeks technology that is oriented toward a deeper experimental and theoretical understanding of marine turbulence and laser light propagation in the marine boundary. Current measurement techniques, such as Doppler Velocimetry (LDV) technique, are limited to resolutions of 0.5 meters or greater and fall short of the required millimeter level resolution. A new type of spectral imaging modal ...

    STTR Phase I 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government