You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Large Soft X-Ray Fluorescence Detector

    SBC: Detector Technology, Inc.            Topic: N/A

    Detector Technology will develop and manufacture a 10cm2 large format cone. The cone will be based on a ceramic substrate then coated with glass frit. The cone will then be attached to a standard single channel multiplier. Detector Technology will also investigate different low work function coatings to improve the first strike statistic of fluorescence. Simultaneous research in conjunction with s ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  2. High-Resolution, Two-Dimensional Neutron Imaging Detector

    SBC: NOVA SCIENTIFIC INCORPORATED            Topic: N/A

    Nova Scientific proposes a high-resolution neutron imaging detector having a specialized neutron-sensitive electron amplified detection stage integrated with a cross-strip electronic readout capable of centroid averaging. This detector system will have direct application to two-dimensional imaging of hydrogen fuel cells and support the diagnostic capabilities of the Neutron Imaging Facility (NIF) ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  3. Active Mixing of Polymers in a Dispensing Head

    SBC: nScrypt, Inc.            Topic: N/A

    A method to take three polymers with varying viscosities and mixing those polymers together at the point of interest or more specifically through a micro dispensing nozzle, is being proposed. An active mixing scheme to ensure proper mixing at the pen tip is a feasible approach to this problem. The materials being mixed will not only range in viscosity but also in particle loading, which will be ha ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  4. Ultra-High Vacuum Compatible Wavelength Dispersive X-ray Spectrometer

    SBC: PARALLAX RESEARCH INC            Topic: N/A

    Parallax Research, Inc. proposes to build an Ultra-High Vacuum compatible Wavelength Dispersive X-ray Spectrometer (WDS) that can be used on small spot Auger, XPS, TEM and FESEM analytical instruments for elemental analysis. The effort draws upon Parallax's experience in designing WDS systems for Scanning Electron Microscopes (SEM) and for XRF. This new type of x-ray spectrometer will eliminate th ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  5. A Coded Alternating Micromachined Retroreflector Array (CAMERA)

    SBC: RESEARCH SUPPORT INSTRUMENTS, INC.            Topic: N/A

    RSI will develop a technology to improve fire fighter visibility and enable tracking of position/identity. The Coded Alternating Micromachined Retroreflector Array (CAMERA) will use RSI's microscale retroreflectors, a near-infrared (IR) coating and near-IR sources pulsing on alternating video frames to encode fire fighter identities, and a near-IR video camera. These grain-of-sand-sized markers wo ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  6. A Non-Contact Sensor for Advanced Warning of Structural Collapse

    SBC: Summit Safety, Inc            Topic: N/A

    Summit Safety will develop an ultrasonic, non-contact sensor and system capable of detecting small displacements of structure - such as roof sagging and structural bending - and the acoustic sounds and fire-induced vibrations of structures that are precursors of structural collapse. The system will provide advanced warning to the Incident Commander of potential or imminent structure collapse. In P ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  7. Distributed Automatic Reconifigurable Transponder (DART)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    his proposal focuses on developing Distributed Automatic Reconfigurable Trasponder (DART) system that is capable of achieving distributed multi-nodal voice/data communication for firefighters. Specifically, Williams-Pyro, Inc. proposes to develop an enhanced prototype of distributed Automated Reconfigurable Intelligent Radios, which consists of a series of distributed nodes that will relay voice t ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government