Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC.            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. HLA-ENHANCED DISTRIBUTED GAMING ENVIRONMENT

    SBC: Trident Systems Incorporated            Topic: N/A

    The High Level Architecture (HLA) for Modeling and Simulation is evolving into the DoD standard paradigm for developing distribution simulation environments through the integration of disparate simulations ("federates"). HLA also has significant potential to provide similar benefits to the commercial software industry in general, and the online distributed entertainment industry in particular. H ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. DATA MANAGEMENT/ANALYSIS TOOLS

    SBC: VIRTUAL TECHNOLOGY CORP.            Topic: N/A

    The Defense Modeling & Simulation Office (DMSO) is in the process of defining a common technical framework for modeling and simulation to promote interoperability and reuse, and has established the High-Level Architecture (HLA) to which all DoD simulation must conform. This decree has led to the need for a modular data management system capable of passively collecting data from an HLA federation ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  4. HLA RUNTIME ANALYSIS AND MONITORING TOOLS

    SBC: VIRTUAL TECHNOLOGY CORP.            Topic: N/A

    As the potential of the High Level Architecture (HLA) is realized, the size, scope, and frequency of federations will grow, and as they do, so will the expense of the manual federation planning, execution, monitoring, and analysis process. The basis for an automated approach to exercise execution and monitoring is the Execution Plan developed during the federation planning phase and containing Fe ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  5. Optical Fiber-Based Corrosion System Using Electrochemically Active Coatings

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N/A

    The objective of the proposed program is to address the high service costs of the current U.S. Navy fleet of aircraft by developing a distributed optical fiber sensor system that will help reduce the costs associated with corrosion damage and extend the lifetime of existing aircraft. Annual corrosion of Navy metallic structures has been estimated as high as $1 billion. Additional costs aris ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Development of a Commercial Multiple Degree of Freedom Measurement System

    SBC: American Research Corporation of Virginia            Topic: N/A

    The Multiple Degree of Freedom Measurement (MDFM) System, developed under Wright Laboratory, has been identified as having strong commercial potential as a significant enhancement to existing products in the machine tool industry for machine tool calibration or coordinate measuring machine enhancement. The MDFM is in need of revision to incorporate state-of-the-art technology, to prepare the devi ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  7. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  8. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  9. EMP AND HPM SUPPRESSION TECHNIQUES

    SBC: Integrated Sciences            Topic: N/A

    Survival of present day microelectronic circuits depends on their protection from self generated and external electromagnetic interference. This proposal is oriented toward the class of interference generally referred to as overvoltage transients. Means for mitigating these transients include gas discharge tubes, and various solid state devices. Each of these has their own advantages in particu ...

    SBIR Phase I 1996 Department of DefenseDefense Threat Reduction Agency
  10. A FUEL/AIR DRIVE FLUX COMPRESSOR POWER UNIT FOR ELECTROTHERMAL GUNS

    SBC: KTECH CORP.            Topic: N/A

    The Ktech Team proposes a feasibility study of a fuel/air driven flux compression power unit (FCPU) for electric guns. Through variations of inductance gradients and through changes in scale, the proposed technology will be applicable to both electrothermal/chemical and electromagnetic guns. In the Phase 1 effort, we develop simulation models to predict the performance of the flux compression po ...

    SBIR Phase I 1996 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government