You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
DATA MANAGEMENT/ANALYSIS TOOLS
SBC: VIRTUAL TECHNOLOGY CORP. Topic: N/AThe Defense Modeling & Simulation Office (DMSO) is in the process of defining a common technical framework for modeling and simulation to promote interoperability and reuse, and has established the High-Level Architecture (HLA) to which all DoD simulation must conform. This decree has led to the need for a modular data management system capable of passively collecting data from an HLA federation ...
SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense -
HLA RUNTIME ANALYSIS AND MONITORING TOOLS
SBC: VIRTUAL TECHNOLOGY CORP. Topic: N/AAs the potential of the High Level Architecture (HLA) is realized, the size, scope, and frequency of federations will grow, and as they do, so will the expense of the manual federation planning, execution, monitoring, and analysis process. The basis for an automated approach to exercise execution and monitoring is the Execution Plan developed during the federation planning phase and containing Fe ...
SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense -
Liquid Rocket Engine Combustion Components Fabricated from ZrB2/BN Composite Using Electroconsolidation (TM) Rapid Densification Technique
SBC: Sensintel Inc. Topic: N/AThe goal of this program is to design and fabricate selected liquid rocket engine combustion components. This goal will be accomplished by developing a low-cost, near net-shape technology for fabrication and rapid densification of ablation and oxidation-resistant LRE components for a wide variety of Air Force missions. The material which will be used for this purpose is zirconium diboride/boron ...
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
Development of a Commercial Multiple Degree of Freedom Measurement System
SBC: American Research Corporation of Virginia Topic: N/AThe Multiple Degree of Freedom Measurement (MDFM) System, developed under Wright Laboratory, has been identified as having strong commercial potential as a significant enhancement to existing products in the machine tool industry for machine tool calibration or coordinate measuring machine enhancement. The MDFM is in need of revision to incorporate state-of-the-art technology, to prepare the devi ...
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys
SBC: American Research Corporation of Virginia Topic: N/AN/A
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition
SBC: Cm Consulting Topic: N/AThe final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
SMART SENSORS USING OPTICAL FIBER INTERCONNECTS AND DISTRIBUTED MEMS
SBC: LUNA INNOVATIONS INCORPORATED Topic: N/AN/A
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
Long-Life, Low-Vibration, Rotary Stirling Cryocooler
SBC: General Pneumatics Corporation Topic: N/ADevelopment is proposed of a new, rotary form of Stirling cryocooler which offers longer operating life and much lower vibration than reciprocating forms of cryocoolers. The proposed machine has fewer moving parts to wear and can be completely balanced to eliminate vibration in all planes by simple counterweights on the shaft, which is not possible in reciprocating machines. The rotary desi ...
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
Hybrid Batteries
SBC: MOLTECH CORPORATION Topic: N/AThe objective of this proposal is to design and manufacture a hybrid battery between Moltech Corporation cells, which provide long cycle life , high specific energy (300-400 Wh/Kg) and high energy density (300-400 Wh/Kg), with either a high rate lead acid battery or a supercapacitator, which will provide extremely high discharge rate capabilities. The Moltech cell will continuously keep the Pb-H o ...
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
Erasable Holographic Optical Storage
SBC: North Dancer Labs, Inc. Topic: N/AThe ability to store digital, high resolution images at high speeds (10 kHz and higher) has tremendous commercial applications. To meet this need North Dancer Labs proposes to develop a unique high-speed Erasable Holographic Optical Storage system (E-HOS) capable of recording ~100 or more 2-D images with at least 1K X 1K resolution at a 10kHz repetition rate (or higher) which can then be digitize ...
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense