You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Medium Voltage Direct Current (MVDC) Fault Detection, Localization, and Isolation

    SBC: ISSAC Corp            Topic: N16AT009

    During the Phase II effort, the ISSAC Team will investigate several objectives and questions posed in Phase I efforts, in order to best develop a draft specification for NGES MVDC DLI systems. This includes exploring notional and conceptual architectures and discerning thresholds for DLI parameters; exploring individual and hybrid protection plan technologies to drive performance requirements for ...

    STTR Phase II 2018 Department of DefenseNavy
  2. Fuel Efficient Nanofluid Gear Oil

    SBC: Pixelligent Technologies, LLC            Topic: A15AT018

    Improving vehicle fuel efficiency for the military can significantly reduce costs and reduce risk to solider safety. One way to improve vehicle efficiency for new and legacy vehicles is to reduce frictional loses in the drivetrain through use of lower viscosity lubricants. However, this comes with the risk of reducing durability of drivetrain components through increased wear, pitting and scuffing ...

    STTR Phase II 2018 Department of DefenseArmy
  3. Closed-Loop Feedback Control for Transcranial Direct Current Stimulation

    SBC: QUANTUM APPLIED SCIENCE & RESEARCH INC            Topic: AF17BT002

    Because of rising demand for human analysts and more efficient processing of increasingly large and challenging amounts of intelligence, human limitations on mental workload, cognitive fatigue, and attentionor task engagement, need to be accurately monitored in real-time in order to provide sensitive detection of impaired cognitive states. It is a challenge to continuously monitor these cognitive ...

    STTR Phase I 2018 Department of DefenseAir Force
  4. Disposal of Aqueous Film-Forming Foam using Hydrodynamic Cavitation

    SBC: DYNAFLOW, INC.            Topic: AF17BT001

    The widespread use of Aqueous Film Forming Foams (AFFF) at DOD facilities for firefighting, training, and fire suppression systems has resulted in numerous contamination sites. The perfluoroalkyl (PFA) compounds used in the AFFF, such as perfluoroalkyl sulfonates (PFOS) and perfluoroalkyl carboxylic acids (PFOA) are extremely stable in the environment and have been shown to be resistant to typical ...

    STTR Phase I 2018 Department of DefenseAir Force
  5. ECCCHO: Effective Combat Casualty Care Handoff Operations

    SBC: TIER 1 PERFORMANCE SOLUTIONS LLC            Topic: DHA17B002

    Approximately 70% of sentinel events in medical care are related to communication mishaps, and despite regular and frequent occurrence, an even higher percentage (80%) of severe medical errors are related to miscommunication during handoffs (i.e., the transferring of information, responsibility, and authority for patient care from one provider to another). The TiER1 team proposes to address challe ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  6. Low-Defect GeSn and SiGeSn for Integrated High-Performance SWIR and MWIR Optoelectronics

    SBC: FREEDOM PHOTONICS LLC            Topic: AF16AT28

    Advanced imaging techniques and, novel intelligence, surveillance and reconnaissance (ISR) methods are of great interest to the U.S. Air Force and other Department of Defense (DoD) agencies, but associated high-costs of III-V and II-VI MWIR and SWIR materials prohibit their practical widespread deployment and integration with other optoelectronic devices. In this program, we intend to investigate ...

    STTR Phase II 2018 Department of DefenseAir Force
  7. Three-Dimensional Density Imaging by Rayleigh Scattering

    SBC: METROLASER, INCORPORATED            Topic: AF16AT06

    A diagnostic is proposed for obtaining instantaneous three-dimensional volumetric distributions of density in a flow field at velocities ranging from subsonic to supersonic. Multiple Sheet Filtered Rayleigh Scattering (MSFRS) will be developed, which enables a series of two-dimensional images to be rapidly obtained making up a volumetric image while suppressing background scattering from wind tunn ...

    STTR Phase II 2018 Department of DefenseAir Force
  8. Rydberg-atom RF Sensors for Direction Finding and Geolocation

    SBC: COLDQUANTA, INC.            Topic: AF17AT028

    ColdQuanta is partnering with Dr. Zoya Popovic at the University of Colorado, Boulder, to develop a three-dimensional quantum-enhanced radio-frequency (RF) signal sensor and direction finder. Our approach combine Rydberg-atom-based RF electrometry and discrete lens arrays (DLAs) of planar antennas. The DLA will serve as a Fourier optic for an incident wave, and a Rydberg-atom RF electrometer will ...

    STTR Phase I 2018 Department of DefenseAir Force
  9. Hypersonic Experimental Aerothermoelastic Test (HEAT)

    SBC: GLOBAL AEROSPACE CORPORATION            Topic: AF16AT24

    The U.S. Air Force is interested in developing hypersonic vehicles including reusable transport aircraft, cruise missiles, and unmanned systems. Hypersonic flight regimes result in multifaceted and very difficult design challenges that can be encapsulated into an aerothermoelastic problem, which is a complex interaction of structural, thermal, and aerodynamic mechanisms. When a flexible structural ...

    STTR Phase II 2018 Department of DefenseAir Force
  10. In Situ Inspection of Additive Manufactured Metallic Parts Using Laser Ultrasonics

    SBC: INTELLIGENT OPTICAL SYSTEMS, INC.            Topic: N15AT008

    Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

    STTR Phase II 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government